In:
HTM Journal of Heat Treatment and Materials, Walter de Gruyter GmbH, Vol. 69, No. 5 ( 2014-10-14), p. 273-281
Kurzfassung:
Powder metallurgical steel grades offer higher quality and performance compared to cast and forged steel grades due to their finer microstructure without segregations or textures. Because high-alloyed, cold work tool steels cannot be compacted by solid-state sintering, hot isostatic pressing is state of the art. This process, however, is comparatively expensive and there is thus a high demand for alternative densification processes. Supersolidus liquid-phase sintering represents an alternative to hot isostatic pressing for densification of these steels to theoretical density. During sintering, the steel powder interacts with the sintering atmosphere, which can be a vacuum, hydrogen, hydrogen plus nitrogen, or nitrogen. In a nitrogen atmosphere, there may be nitrogen uptake by the sintered material, which changes the chemical composition of the steel and thus results in a decrease in the sintering temperature. The aim of this work is to investigate the influence of nitrogen uptake on the hardenability of a high-alloyed and supersolidus-sintered cold work tool steel. Computational thermodynamics using the Calphad method were applied to calculate the optimal parameters for direct quenching from the sintering temperature. In addition, the tempering response was investigated as a function of the heat-treatment parameters. It was found that nitriding exerts a significant influence on the hardenability, which is also dependent on the cooling rate from the sintering temperature to the quenching temperature. Hardenability was predicted qualitatively on the basis of equilibrium carbon concentrations of the austenitic matrix calculated with the Calphad method.
Materialart:
Online-Ressource
ISSN:
2194-1831
,
1867-2493
Sprache:
Englisch
Verlag:
Walter de Gruyter GmbH
Publikationsdatum:
2014
Bookmarklink
