In:
Materials Science Forum, Trans Tech Publications, Ltd., Vol. 537-538 ( 2007-2), p. 121-128
Abstract:
Highly oriented polypropylene fiber reinforced random PP copolymer composites were
produced by film-stacking method. The reinforcing fibers were carded and needle punched and the film-stacked packages were compression molded at different processing temperatures
(T=150…170°C) and holding times (t=90…600 s). For characterization of the consolidation of the composite sheets interlaminar strength was determined and further the polished sections were
studied by light microscopy. Static tensile and dynamic impact (instrumented falling weight impact - IFWI) tests were performed on the specimens cut from the sheets. It was established that the best
properties can be achieved when the processing conditions are 165°C and 90s. Increasing temperature and improving consolidation reduced perforation impact energy owning to better
fiber/matrix adhesion and the smaller extent of delamination between the film-stacked layers.
Type of Medium:
Online Resource
ISSN:
1662-9752
DOI:
10.4028/www.scientific.net/MSF.537-538
DOI:
10.4028/www.scientific.net/MSF.537-538.121
Language:
Unknown
Publisher:
Trans Tech Publications, Ltd.
Publication Date:
2007
detail.hit.zdb_id:
2047372-2
Bookmarklink
