In:
Journal of Applied Physics, AIP Publishing, Vol. 134, No. 3 ( 2023-07-21)
Abstract:
Electrical and thermal measurements were conducted during the plasma electrolytic polishing (PEP) of cemented tungsten carbide (WC-Co) materials to characterize energetic aspects of the process in relation to the temporal development of the gaseous layer near the workpiece. The power transferred to the workpiece is determined using a calorimetric probe and employing the time derivative of the temperature curve. It shows distinct heating phases due to the generation of the gaseous layer. At the beginning of the process, a typical power of 367 ± 17 W is transferred to the workpiece of a surface area of 14 cm2. At longer process times, a stabilized gaseous layer limits the power transferred to the workpiece to 183 ± 3 W. In an attempt to describe the heat transferred to the electrolyte, the electrolyte temperature was measured using a thermocouple situated 15 mm away from the workpiece. The local electrolyte temperature increases from 70 to 81 °C for an immersion depth of 20 mm. Moreover, the spatiotemporal development of the electrolyte temperature was obtained by 2D-hydrodynamic modeling using COMSOL Multiphysics®. The modeling results for the local temporal temperature development are in excellent agreement with the experimental values when the turbulent model is applied up to t = 65 s. Afterward, the laminar model leads to a better agreement. Furthermore, line scan x-ray photoelectron spectroscopy revealed that aliphatic carbon was preferentially removed. Only a slight compositional gradient in the vertical direction after the PEP process was observed.
Type of Medium:
Online Resource
ISSN:
0021-8979
,
1089-7550
Language:
English
Publisher:
AIP Publishing
Publication Date:
2023
detail.hit.zdb_id:
220641-9
detail.hit.zdb_id:
3112-4
detail.hit.zdb_id:
1476463-5
Bookmarklink
