Format:
Online-Ressource
ISSN:
1437-1022
Content:
Abstract: The earthquakes in Albstadt in 1978 (magnitude 5.7), Roermond in 1992 (magnitude 5.9), and Waldkirch in 2004 (magnitude 5.1) have made it clear that earthquake‐resistant design of ma‐ sonry structures is also very important in Germany. In 1981, DIN 4149 (1981) “Buildings in German earthquake areas – Design loads, analysis, and structural design of buildings” was introduced, although it only contained a few requirements for masonry structures. This standard was completely revised by the Building and Civil Engineering Standards Committee “Earthquakes; Special issues” of the German Institute for Standardization (DIN) on the basis of Eurocode 8 (2004) and was replaced by DIN 4149 (2005), which contains detailed rules for the seismic design of masonry structures. In the meantime, DIN EN 1998‐1 (2010) and the national annex DIN EN 1998‐1/NA (2011) became available, which were adopted by the building supervisory board after integrating the results of application tests performed and replace DIN 4149 (2005). The following article provides an overview of the seismic calculation and analysis of masonry structures according to the European codes and illustrates their application on a sample structure.
Content:
Die Erdbeben in Albstadt 1978 (Magnitude 5,7), Roermond 1992 (Magnitude 5,9) oder in Waldkirch 2004 (Magnitude 5,1) haben verdeutlicht, dass die erdbebensichere Auslegung von Mauerwerksbauten auch in Deutschland von großer Bedeutung ist. Bereits im Jahr 1981 wurde die DIN 4149 (1981) “Bauten in deutschen Erdbebengebieten – Lastannahmen, Bemessung und Ausführung üblicher Hochbauten“ eingeführt, in der aber für Mauerwerksbauten nur wenige Anforderungen gestellt wurden. Diese Norm wurde durch den NABau‐Arbeitsausschuss “Erdbeben; Sonderfragen“ des Deutschen Instituts für Normung e.V. (DIN) auf Grundlage des Eurocode 8 (2004) vollständig überarbeitet und durch die DIN 4149 (2005) abgelöst, die umfangreiche Regelungen für die seismische Auslegung von Mauerwerksbauten enthält. Mittlerweile liegen die DIN EN 1998‐1 (2010) und der Nationale Anhang DIN EN 1998‐1/NA (2011) vor, die nach Einarbeitung der Ergebnisse der durchgeführten Anwendungserprobung bauaufsichtlich eingeführt und die DIN 4149 (2005) ersetzen werden. Der folgende Beitrag gibt einen Überblick über die seismische Berechnung und Bemessung von Mauerwerksbauten nach dem europäischen Regelwerk und illustriert deren Anwendung an einem baupraktischen Beispiel.
In:
volume:18
In:
number:3‐4
In:
year:2014
In:
pages:188-196
In:
extent:9
In:
Mauerwerk, Berlin : Ernst & Sohn, [2001]-, 18, Heft 3‐4 (2014), 188-196 (gesamt 9), 1437-1022
Language:
English
DOI:
10.1002/dama.201400626
URN:
urn:nbn:de:101:1-2023011310003927276502
URL:
https://doi.org/10.1002/dama.201400626
URL:
https://nbn-resolving.org/urn:nbn:de:101:1-2023011310003927276502
URL:
https://d-nb.info/127804681X/34
URL:
https://doi.org/10.1002/dama.201400626
Bookmarklink