Format:
Online-Ressource
ISSN:
1521-4052
Content:
Abstract: The Young modulus E exhibits a coefficient in the Hooke's law. It is influenced by external parameters as temperature, forming forces, forming velocity, delay time, static or dynamic straining, stress state in tension or compression, and by internal, material‐related parameters as chemical composition, textures, lattice defect contents and results of occurred diffusion processes. Iron‐base alloys and steels – as here on single‐phase to three‐phase Fe‐V‐C and Fe‐Mo‐C alloys – showed the dependence of E on the microstructure (grain size and phase arrangement). The influence of annealing temperature yields grain growth with corresponding grain sizes. From this an equilibrium ratio of E to a distinct grain size D̄ after heat treatment in the γ‐range of iron alloys, dependent on the concentration of alloying elements, is adjusted. Besides the equilibrium E/−ln D̄ also non‐equilibrium states occur, and therefore the possibilities exist to reduce the Young modulus till to a concentration‐dependent minimum (equilibrium), and to raise it into the non‐equilibrium stages. The influences of texture and remaining dislocation content are small. With the specific variation of E it is possible to improve the stiffness of thin steel sheet materials, preferred this is interesting for the car industry.
Content:
Einfluß des Gefüges auf den E‐Modul von Fe‐V‐C und Fe‐Mo‐C‐Legierungen Der Elastizitätsmodul E stellt einen Koeffizienten im Hooke'schen Gesetz dar. Er wird durch äußere Parameter wie Temperatur, Umformkräfte, Umformgeschwindigkeit, Haltezeit, statische oder dynamische Beanspruchung, Spannungszustand bei Zug oder Druck, und durch innere, materialbezogene Parameter wie chemische Zusammensetzung, Texturen, Gitterfehlergehalte und Ergebnisse von abgelaufenen Diffusionsprozessen beeinflußt. Eisenbasislegierungen und Stähle – hier für ein‐ bis dreiphasige Fe‐V‐C‐ und Fe‐Mo‐C‐Legierungen – ergaben die Abhängigkeit von E vom Gefüge (Korngröße und Phasenanordnung). Der Einfluß der Glühtemperatur führt zum Kornwachstum mit entsprechenden Korngrößen. Hieraus wird ein Gleichgewichtsverhältnis von E zu einer bestimmten Korngröße D nach Wärmebehandlung im γ‐Bereich von Eisenlegierungen, abhängig von der Konzentration der Legierungselemente, festgestellt. Neben dem Gleichgewicht E/−ln D̄ treten auch Ungleichgewichtszustände auf. Daher gibt es Möglichkeiten, den Elastizitätsmodul E bis zu einem konzentrationsabhängigen Minimum (Gleichgewicht) herabzusetzen, und ihn in die Ungleichgewichtsbereiche heraufzusetzen. Die Einflüsse der Textur und eines zurückgebliebenen Versetzungsgehaltes sind gering. Mit der gezielten Veränderung von E ist es möglich, die Steifigkeit dünner Stahlbleche zu verbessern, wobei dies besonders für die Autoindustrie interessant ist.
In:
volume:32
In:
number:9
In:
year:2001
In:
pages:701-711
In:
extent:11
In:
Materials science and engineering technology, Weinheim : Wiley-VCH, 1970-, 32, Heft 9 (2001), 701-711 (gesamt 11), 1521-4052
Language:
English
DOI:
10.1002/1521-4052(200109)32:9〈701::AID-MAWE701〉3.0.CO;2-S
URN:
urn:nbn:de:101:1-2023102806453005433651
URL:
https://doi.org/10.1002/1521-4052(200109)32:9〈701::AID-MAWE701〉3.0.CO;2-S
URL:
https://nbn-resolving.org/urn:nbn:de:101:1-2023102806453005433651
URL:
https://d-nb.info/130764886X/34
URL:
https://doi.org/10.1002/1521-4052(200109)32:9〈701::AID-MAWE701〉3.0.CO;2-S
Bookmarklink