In:
Tribologie und Schmierungstechnik, Narr Francke Attempto Verlag GmbH + Co. KG, Vol. 69, No. 5-6 ( 2023-02-15), p. 34-42
Abstract:
Machine manufacturers face the challenge that components in contact with aggressive media must fulfill extreme requirements in terms of corrosion and wear resistance. In many cases, filled polymer-based coatings provide sufficient protection. In the course of this work, such coatings were produced and tribologically tested with respect to their tribological performance from model to component-like levels. To obtain information on the occurring tribological influences with regard to used resin or particle size, rotational ball-on-disk tests were carried out. Based on these findings, the most promising coating was selected and tested using application-oriented test methods. The obtained results showed a generally good wear resistance of the coatings against metallic counterparts in lubricated states. In addition, the further development of the model tests, towards application-oriented tests, also provided the basis for the transferability of the results.
Type of Medium:
Online Resource
ISSN:
0724-3472
DOI:
10.24053/TuS-2022-0043
Language:
Unknown
Publisher:
Narr Francke Attempto Verlag GmbH + Co. KG
Publication Date:
2023
detail.hit.zdb_id:
246052-X
Bookmarklink