In:
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, SAGE Publications, Vol. 236, No. 5 ( 2022-03), p. 2128-2146
Abstract:
A new type of two-dimensional (2D) piston pump with a stacked cone roller set was introduced to eliminate the influence of the gap between the guiding rail and the cone roller. First, the structure and working principle of the 2D piston pump were studied; then, a corresponding mathematical model which considered the oil viscosity and oil churning loss caused by the rotation of the guiding rail in the enclosed chamber was established to examine the volumetric and mechanical efficiency of the 2D piston pump. The effects of different speeds, load pressures, and rolling friction coefficients between the guiding rail and the cone rollers on the efficiency were considered. During the test, when the speed was 6000 r/min and the load pressure was 6 MPa and 8 MPa, the volumetric efficiency reached 98.3% and 96.8%, respectively, basically consistent with the theoretical analysis. Because the temperature rise of the tested pump caused the oil viscosity and the eccentricity of the piston and piston rings increased the leakage, the test result was slightly lower than that of the theoretical analysis. When the speed was 1000 r/min and the load pressure was 5 MPa, the mechanical efficiency was 69.3%, and the mechanical efficiency model was consistent with the test results. However, with the increase in speed and load pressure, the difference between the test results and theoretical analysis results increased because the supporting force of the cone roller on the guiding rail increased, increasing the rolling frictional losses.
Type of Medium:
Online Resource
ISSN:
0954-4062
,
2041-2983
DOI:
10.1177/09544062211028271
Language:
English
Publisher:
SAGE Publications
Publication Date:
2022
detail.hit.zdb_id:
2024890-8
Bookmarklink
