Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
  • 1
    Online Resource
    Online Resource
    Informa UK Limited ; 2015
    In:  Fusion Science and Technology Vol. 67, No. 2 ( 2015-03), p. 254-257
    In: Fusion Science and Technology, Informa UK Limited, Vol. 67, No. 2 ( 2015-03), p. 254-257
    Type of Medium: Online Resource
    ISSN: 1536-1055 , 1943-7641
    Language: English
    Publisher: Informa UK Limited
    Publication Date: 2015
    detail.hit.zdb_id: 2132501-7
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 2
    Online Resource
    Online Resource
    Informa UK Limited ; 2002
    In:  Fusion Science and Technology Vol. 41, No. 3P2 ( 2002-05), p. 458-463
    In: Fusion Science and Technology, Informa UK Limited, Vol. 41, No. 3P2 ( 2002-05), p. 458-463
    Type of Medium: Online Resource
    ISSN: 1536-1055 , 1943-7641
    Language: English
    Publisher: Informa UK Limited
    Publication Date: 2002
    detail.hit.zdb_id: 2132501-7
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 3
    In: Journal of Applied Physics, AIP Publishing, Vol. 101, No. 3 ( 2007-02-01)
    Abstract: A molecular dynamics model is used to understand the layer-by-layer etching of Si and SiO2 using fluorocarbon and Ar+ ions. In these two-step etch processes, a nanometer-scale fluorocarbon passivation layer is grown on the material’s surface using low energy CFx+ ions or radicals. The top layers of the material are then reactive ion etched by Ar+ ions utilizing the fluorocarbon already present on the material surface. By repeating these two steps, Si or SiO2 can be etched with nanometer-scale precision and the etch rate is considerably faster than what traditional atomic layer etching techniques provide. The modeling results show that fluorocarbon passivation films can be grown in a self-limiting manner on both Si and SiO2 using low energy CF2+ and CF3+ ions. The fluorocarbon passivation layer is a few angstroms thick, and its thickness increases with the fluorocarbon ion’s energy. Increasing the ion energy, however, amorphizes the top atomic layers of the material. In addition, the fluorocarbon film becomes F rich with increasing ion energy. Simulations of fluorocarbon passivated SiO2 surface show that Ar+ ions with energy below 50eV etch Si (within SiO2) in a self-limiting manner. Si etching stops once F in the fluorocarbon passivation layer is exhausted or is pushed too deep into the substrate. Oxygen within SiO2 is more easily sputtered from the material surface than Si, and the top layers of SiO2 are expected to become O deficient during Ar+ ion bombardment. Ar+ ion etching of fluorocarbon passivated Si also appears to be self-limiting below 30eV ion energy, and etching stops once F on the material surface is either consumed or becomes inaccessible.
    Type of Medium: Online Resource
    ISSN: 0021-8979 , 1089-7550
    Language: English
    Publisher: AIP Publishing
    Publication Date: 2007
    detail.hit.zdb_id: 220641-9
    detail.hit.zdb_id: 3112-4
    detail.hit.zdb_id: 1476463-5
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 4
    In: Journal of Applied Physics, AIP Publishing, Vol. 97, No. 9 ( 2005-05-01)
    Abstract: A molecular-dynamics-based model has been developed to understand etching of amorphous SiO2, with and without a fluorocarbon reactive layer, by energetic fluorocarbon (CFx+) ions. The model includes a representation of the solid and a set of interatomic potentials required for the SiO2–CFx interaction system. Two- and three-body pseudopotentials have either been obtained from published literature or computed using ab initio techniques. The Stillinger–Weber potential construct is used to represent potentials in our model and particle trajectories are advanced using the velocity-Verlet algorithm. The model is validated by comparing computed bond lengths and energies with published experimental results. Computed yield for Ar+ ion sputtering of SiO2 is also compared with published data. In the computational results described in this article, the model SiO2 test structure (with a thin fluorocarbon reactive layer) is prepared by starting with α-quartz ([001] orientation) and bombarding it with 50-eV CF2+ ions. Energetic CF2+ ions with different energies and angles of impact are then bombarded on this test structure to determine ion etch characteristics. Results show that etch yield increases with ion energy for all angles of impact. Etch yield, however, exhibits a nonlinear dependence on angle of impact with a peak around 60°. This nonlinear behavior is attributed to the balance among fraction of incident ion energy deposited in the material, ion energy deposition depth, and direction of scattering during secondary interaction events. Si in the lattice is primarily etched by F atoms and the primary Si-containing etch by-products are SiFx and SiOxFy radicals. However, oxygen either leaves the test structure as atomic O or in combination with C. While fragments of the energetic incident ion retain a substantial fraction of incident ion energy on ejection from the surface, etch by-products that have their origin in test structure atoms only have a few eV of energy on exit. Etch results are sensitive to fluorocarbon layer characteristics and etch yields decrease as the fluorocarbon reactive layer thickens.
    Type of Medium: Online Resource
    ISSN: 0021-8979 , 1089-7550
    Language: English
    Publisher: AIP Publishing
    Publication Date: 2005
    detail.hit.zdb_id: 220641-9
    detail.hit.zdb_id: 3112-4
    detail.hit.zdb_id: 1476463-5
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 5
    In: Journal of Applied Physics, AIP Publishing, Vol. 97, No. 9 ( 2005-05-01)
    Abstract: A molecular-dynamics-based model has been used to understand etching of SiO2, with and without a fluorocarbon-polymer layer, by energetic fluorocarbon (CFx+) ions. The test structures for computational experiments are prepared by starting with α-quartz ([001] orientation) and bombarding it with low-energy ions: Ar+ ion for amorphous and fluorocarbon ions for fluorocarbon-polymerized test structures. CF+, CF2+, and CF3+ ions with a range of energies and angles of impact are then bombarded on these test structures to characterize fluorocarbon-ion etching. Results show that aggregate Si and O etch yields increase with ion energy for all ions and all angles of impact. Etch yields, however, exhibit nonlinear dependence on angle of impact with a peak around 60°. This nonlinear behavior is attributed to the balance among the incident ion energy transfer fraction, depth of energy deposition, and cluster scattering direction during secondary scattering events. The Si etch yield increases going from CF+ to CF2+ and then decreases for CF3+. This etch yield dependence on the nature of ion is because the amount of F per ion increases but the energy per F atom decreases as one moves from CF+→CF2+→CF3+. Si and O etch yields decrease considerably without the presence of the fluorocarbon layer, emphasizing the importance of C and F in etching SiO2. Parent ion clusters are only observed in the etch effluent at low ion energy and near the grazing angle of incidence. Under other conditions, the incident ion fragments upon impact at the surface. If fragments of the incident ions make it out of the surface, they retain a substantial fraction of the incident ion energy and their angle of ejection from the surface is related to the ion angle of incidence. However, clusters that contain test structure atoms are ejected from the surface with only a few eV of energy, and their angular and energy distributions are relatively independent of incident ion characteristics.
    Type of Medium: Online Resource
    ISSN: 0021-8979 , 1089-7550
    Language: English
    Publisher: AIP Publishing
    Publication Date: 2005
    detail.hit.zdb_id: 220641-9
    detail.hit.zdb_id: 3112-4
    detail.hit.zdb_id: 1476463-5
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 6
    Online Resource
    Online Resource
    AIP Publishing ; 2007
    In:  Journal of Applied Physics Vol. 101, No. 5 ( 2007-03-01)
    In: Journal of Applied Physics, AIP Publishing, Vol. 101, No. 5 ( 2007-03-01)
    Abstract: A molecular dynamics model is used to investigate the interaction of energetic ions with fluorocarbon passivated Si, O, C, and H (SiOCH) based low-κ dielectrics. The model includes a set of interatomic potentials required for the SiOCH–CFx interaction system, where the two- and three-body pseudopotentials have either been obtained from published literature or computed using ab initio techniques. The test structure used for the ion interaction simulations is put together through deposition of low energy SiOx+, CHy+, and H+ ions on a crystalline Si substrate. A thin fluorocarbon passivation layer is grown on the low-κ test structures by bombarding them with moderate energy CFx+ ions. Simulations of CF2+ ion interaction with the fluorocarbon passivated SiOCH samples show that the sputter yield of sample constituents (Si, O, and H) increases with ion energy and peaks at about 60°. H sputters more easily compared to other species, and the surface layer is expected to become H deficient over time. Sputtered H atoms are also generated over a broader region near the surface compared to other species. Most sputtered clusters with origin in the bulk film are ejected with energies less than 10eV and their angular and energy distributions are not sensitive to the energy or angle of the incident ion. Incident CF2+ ion breaks apart on contact with the test structure and, at high energies and near normal incidence, virtually no CF2 reflects back from the sample. Fragments of the incident ion have reflectionlike properties: peak in angular dependence function shifts towards larger angles as ion angle of incidence increases and reflected fragments are more energetic as ion angle of incidence increases. Comparison of CF2+ ion etching properties of SiOCH low-κ dielectric with SiO2 shows that more atoms are sputtered from SiOCH under identical conditions. However, as many of the sputtered atoms from the SiOCH material are light H atoms, mass etch yield from SiOCH and SiO2 is comparable. Si and O are both found to sputter more easily from SiOCH relative to SiO2. SiOCH low-κ ion etching properties are compared for several ions (CFx+, CHFy+, SiFz+, and Ar+). Results show that the etch yield from F containing ions is larger than that of Ar+, and the etch yield increases as the F content of the ion increases. Comparison of the ion etching properties of porous and nonporous low-κ dielectrics shows that, under similar conditions, the fluorocarbon passivation layer is thicker on the porous material. Due to this thicker passivation layer, mass yield from the porous dielectric material is smaller for the same ion energy.
    Type of Medium: Online Resource
    ISSN: 0021-8979 , 1089-7550
    Language: English
    Publisher: AIP Publishing
    Publication Date: 2007
    detail.hit.zdb_id: 220641-9
    detail.hit.zdb_id: 3112-4
    detail.hit.zdb_id: 1476463-5
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 7
    Online Resource
    Online Resource
    Kola Science Centre ; 2023
    In:  Transactions of the Kоla Science Centre of RAS. Series: Engineering Sciences Vol. 2, No. 2/2023 ( 2023-04-10), p. 50-55
    In: Transactions of the Kоla Science Centre of RAS. Series: Engineering Sciences, Kola Science Centre, Vol. 2, No. 2/2023 ( 2023-04-10), p. 50-55
    Abstract: An ignition temperature is one of the important characteristics of metal powders. The determination of ignition temperature is carried out while producing and checking the overall condition of material. The facility and method for automated determination of metal powder ignition temperature have been developed. The method has the advanced precision parameters.
    Type of Medium: Online Resource
    ISSN: 2949-1215
    Uniform Title: РАЗРАБОТКА УСТАНОВКИ И МЕТОДИКИ ДЛЯ АВТОМАТИЗИРОВАННОГО ОПРЕДЕЛЕНИЯ ТЕМПЕРАТУРЫ ВОСПЛАМЕНЕНИЯ ПОРОШКОВ МЕТАЛЛОВ
    URL: Issue
    Language: Unknown
    Publisher: Kola Science Centre
    Publication Date: 2023
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 8
    Online Resource
    Online Resource
    IOP Publishing ; 2019
    In:  Journal of Physics: Conference Series Vol. 1368, No. 5 ( 2019-11-01), p. 052005-
    In: Journal of Physics: Conference Series, IOP Publishing, Vol. 1368, No. 5 ( 2019-11-01), p. 052005-
    Abstract: The article proposes a new method of bit hierarchical addressing. To record the component of the hierarchical address, two bits of service information are used which show the number of blocks of standard length. To search for a route in hierarchical address environments, the complex method of greedy forwarding with two centers of hierarchy is proposed.
    Type of Medium: Online Resource
    ISSN: 1742-6588 , 1742-6596
    Language: Unknown
    Publisher: IOP Publishing
    Publication Date: 2019
    detail.hit.zdb_id: 2166409-2
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. Further information can be found on the KOBV privacy pages