Kooperativer Bibliotheksverbund

UID:

Format: 1 online resource (267 p.)

ISBN: 0-85709-758-X

Series Statement: Woodhead Publishing Series in Textiles ; Number 130

Content: With increased environmental awareness and rising costs, manufacturers are investing in real time monitoring and control of dyeing to increase its efficiency and quality. This book reviews ways of automating the dyeing process as well as ways of understanding key processes in dyeing, including dye transport in fluid systems. This understanding is then used to create models to simulate the dyeing process which can then be used to develop appropriate measurement and control systems. Control of variables such as temperature, pH, conductivity and dye concentration can then be used to ensure a more consistent and cost-effective dyeing process. Reviews the dyeing process and dye house automation, and the factors that affect dyeing quality and common difficulties in the process. Explains the principles underlying the dyeing process and provides a thorough understanding of the mathematical models that can be used to approximate it. Discusses techniques for monitoring dyebaths and controlling the dyeing process.

Note: Bibliographic Level Mode of Issuance: Monograph , Cover -- Modelling, Simulation and Control of the Dyeing Process -- Copyright -- Contents -- Dedication -- Dedication -- Woodhead Publishing Series in Textiles -- Preface -- Definition of terms -- Nomenclature -- 1 Introduction to dyeing and dyehouse automation -- 1.1 Introduction -- 1.2 Factors affecting dyeing quality -- 1.3 Practical difficulties involved in dyeing process control -- 1.4 Package dyeing machinery -- 1.5 Difficulties in package dyeing -- 1.6 Automation in the dyehouse -- 1.7 References -- 2 Principles underlying the dyeing process -- 2.1 Introduction -- 2.2 Dye transport from the bulk solution to the fi bre surface -- 2.3 Adsorption of dyes by textile fibres -- 2.4 Diffusion of the dye into the interior of the fibre -- 2.5 Rate of dyeing -- 2.6 References -- 3 Dye transport in fluid systems -- 3.1 Introduction -- 3.2 Fluid properties in perspective -- 3.3 Flows in porous media -- 3.4 Convective mass transfer in fluid system -- 3.5 Dye transfer in dyeing -- 3.6 References -- 4 Developing theoretical models of dyeing -- 4.1 Introduction -- 4.2 System description and basic assumptions -- 4.3 Development of mathematical model -- 4.4 References -- 5 Solving dynamic equations in dye transport -- 5.1 Introduction -- 5.2 Numerical methods -- 5.3 Summary of the model equations -- 5.4 Numerical solutions of equations -- 5.5 References -- 6 Simulation of the dyeing process -- 6.1 Introduction -- 6.2 Fluid flow behaviour in dyeing -- 6.3 Dynamic behaviour of mass transfer in package dyeing -- 6.4 Conclusions from simulation results -- 6.5 References -- 7 Principles of control in dyeing processes -- 7.1 Introduction -- 7.2 Introduction to process control -- 7.3 Control algorithms -- 7.4 Analog and digital processing -- 7.5 Practical application in a pilotscale operation -- 7.6 pH measurement and control in a dyeing system. , 7.7 The feedforward control strategy -- 7.8 Acknowledgement -- 7.9 References -- 8 Measurement and control of dyeing -- 8.1 Introduction -- 8.2 Realtime measurement of dye concentration -- 8.3 Data processing and tools to analyse and interpret realtime dye monitoring data -- 8.4 Conclusion -- 8.5 References -- Index. , English

Additional Edition: ISBN 0-85709-133-6

Additional Edition: ISBN 1-322-06903-4

Language: English

UID:

Format: 1 online resource (286 p.)

ISBN: 0-85709-293-6

Series Statement: Woodhead Publishing Series in Biomaterials

Content: Bioactive materials play an increasingly important role in the biomaterials industry, and are used for a range of applications, including artificial organs, drug delivery systems, nanomedicine, and biosensors. Bioactive materials in medicine reviews the current status and ongoing development of bioactive materials for medical applications.Following an introduction to bioactive materials in medicine, part one covers the process of designing bioactive materials, including chapters on molecular design, nanotechnology, and tissue engineering. Part two focuses on the different applications

Note: Description based upon print version of record. , pt. 1. Designed bioactive materials for use in medicine -- pt. 2. Applications of bioactive materials in medicine. , English

Additional Edition: ISBN 1-84569-624-7

Language: English

UID:

Format: 1 online resource (417 p.)

Edition: 1st ed.

ISBN: 3-03813-890-8

Series Statement: Advanced materials research ; volume 568

Content: These are the proceedings of the 2012 International Conference on Civil Engineering and Material Engineering (CEME2012), August 25-26, Wuhan, China. The 90 peer reviewed paper are grouped as follows: Chapter 1: Material Application and Structure in Civil Engineering; Chapter 2: Mechanics Research in Civil Engineering and Material Engineering; Chapter 3: Environmental Material and Civil Engineering; Chapter 4: Material Engineering and its Application Technology. Review from Book News Inc.: Many of the 90 papers in this collection consider areas where civil engineering and materials engineering

Note: Description based upon print version of record. , Advanced Research on Civil Engineering and Material Engineering; Preface and Committees; Table of Contents; Chapter 1: Material Application and Structure in Civil Engineering; Literature Review of Precast Concrete Frame Structures in Civil Engineering; Experimental Study on Fire Resistant of Shield Tunnel Segment in Civil Engineering; Study on the Pyrolysis Kinetics Characteristics of the Wood from the Ancient Buildings; Practical Research on Desulfurization in Converter with the Analysis of Sulfur in Steel for Civil Engineering , An Analysis on Engineering Properties of Peaty Soil in Kunming Civil Engineering The Microstructure and Performance Analysis of HRB400 Rebar Manual Arc Welding Joints with Rebar Materials in Civil Engineering; Analysis of Soil Moisture Characteristics with the Application of Soil in Civil Engineering in 2011 in Gaoyao; Study on Indoor Thermal Environment with Building Materials of Urban Residences in Zhejiang Region: Summer Investigation; Analysis of Two Cross Arm of Reactive Powder Concrete Pole Design with Structure Materials in Civil Engineering , Research on Material Properties and Heat Treatment of Clamping Blocks The Current Situation and Analyze of Huizhou Traditional Architectural Components and Materials to Repair Alternative Techniques; Synthesis of an Intumescent Flame Retardant and its Application to Fireproof Coatings of Steel Structures; Contrastive Analysis on Limitation Span between Suspension Bridge Using Steel and CFRP Cable; The Research about Plastic Cement Playground and Constructed Materials; Simulation and Analysis on Supporting System of Composite Soil Nailing Technology in the Process of Digging , Exploration of the Strategies in Civil Engineering to the Safety Evaluation and Reinforcement Technique of Wood Structure of Ancient Architecture in HuizhouStructural Design on a Building Stair by Folded Steel Plates in Civil Engineering; Test of Solidification Characteristics of Grouting and the Effect on Strata Deformation in Shield Tunnelling; Seismic Damage Analysis and the Study of Reinforcement Measures for RC Frame Structure Building in Civil Engineering , Influence of C/N Ratio on SND and Microbiological Analysis in Catching Bed Biofilm Reactor Using Acrylic Resin Fiber as Carrier Materials in Civil Engineering Study on Reconstruction of Elevation Structural Shape for Historic Industrial Buildings in Chinese Civil Engineering; Bored Pile Settlement Analysis of Pile End Grouting in Civil Engineering; Study on Parameter Optimization of Copper Smelting in Civil Engineering; Cantilever Construction Optimization of Cable-Stayed Bridge with Hybrid Bridge Deck System and Building Materials in Civil Engineering , Study on the New-Style Building Materials in Civil Engineering - Architectural Sandwich Panel and its Application , English

Additional Edition: ISBN 3-03785-474-X

Language: English

Keywords: Electronic books.

URL: Click to View

UID:

Format: 1 online resource (391 p.)

Edition: 1st ed.

ISBN: 3-03826-202-1

Series Statement: Applied mechanics and materials, v 387

Content: Collection of selected, peer reviewed papers from the 2013 International Conference on Applied Mechanics, Materials and Mechanical Engineering (AMME2013), August 24-25, Wuhan, China. The 78 papers are grouped as follows: Chapter 1: Material Engineering, Technology and Material Application; Chapter 2: Applied Mechanics, Hydrodynamics and Dynamic System, Vibration; Chapter 3: Mechanical Engineering, Control and Automation Technologies, Equipment. AMME2013 is documented by 78 papers on material engineering, technology, and material applications; applied mechanics, hydrodynamics and dynamic system

Note: Description based upon print version of record. , Applied Mechanics, Materials and Mechanical Engineering; Preface and Committee; Table of Contents; Chapter 1: Material Engineering, Technology and Material Application; Fluorite Flotation of a Fluorite-Bearing Pb-Zn Tailings; Flotation of a Lead Sulphide Ore in Sichuan, China; Beneficiation of a Low Grade Lead Ore by Gravity Pre-Concentration and Flotation; Research of Environmental Materials with Sewage Marine Discharge Diffusion Effect in YangKou Port; Study on Energy Materials with an Important Source of China's Energy - Kazakhstan Crude Oil Pipeline Transportation , Potato Starch Processing Wastewater Physical Property Estimation Based on Material Properties Determination of Clenbuterol and Florfenicol in Milk Using Miniaturized Solid-Phase Extraction Based on Hybrid Material; Preparation and Properties of Ni-TiB2-Gd2O3 Composite Coatings by Electrodepositon; Application of Nanomaterial in Sports and its Safety Research; The Sintering Characteristics of Industrial Solid Waste Incinerator; Chapter 2: Applied Mechanics, Hydrodynamics and Dynamic System, Vibration; Simulation and Research of Multiple Degree Freedom Vibration System Based on MapleSim , Research on Fluid Mechanics with Slip Flow of Viscoelastic Fluid in the Micro Channel Experimental Design and Mechanics Study on Brain Injury Tolerance under Sagittal Angular Acceleration Based on Shearing Strain Equivalent Coupling Method; Effect of Drive Location on Vibro-Acoustic Characteristics of Submerged Double Cylindrical Shells with Damping Layers; Prediction for Strength of 3D Braided Composites Based on Helix Geometry Model; Earthquake Mechanics Study with Health Check for a Seismic-Damaged Tunnel Suffered from the Wenchuan Earthquake , Experimental and Application Study of a New Type High Strength Repairing Mortar for Hydraulic Concrete Study on Hydromechanics with Critical Instability Flowrate of Two Ends Supported Pipe Conveying Fluid; The Dispersion Estimation Method for Assembly Stress of Silicone Rubber Foam Pad Based on Extreme Value Distribution; The Research Nonlinear Mechanics for Non-Backlash Output Mechanism of Precision Ball Planetary Drive; Force and Simulation Analysis of Thrust Rod on Heavy Commercial Vehicle Balanced Suspension , Simplified Analysis of Different Types of Slope Reinforcements in a Rigid Grid-Pile Composite Foundation Waste Fiber Recycled Concrete Performance Based on Fracture Mechanics Research; The Study of Winding Performance in Key Stage on a Parallel Grooved Drum; Strength Analysis of Parallel Grooved Drum; Research on Tensioning Scheme of Spatial Steel Arch Bridge; Simulation and Experimental Verification of Typical Aircraft Panel Structure Using Piezoelectric Effect for Vibration and Noise Reduction; Effect of Crack Statically Growing on Stress and Strain at Crack Tip for Power Hardening Materials , Experiment Research on Dynamic Characteristics of Ground Fissure Belt Loess in Xi 'an Area , English

Additional Edition: ISBN 3-03785-821-4

Language: English

Keywords: Electronic books.

URL: Click to View

UID:

Format: 1 online resource (562 p.)

Edition: 1st ed.

ISBN: 3-03826-544-6

Series Statement: Advanced Materials Research, Volume 977

Content: Collection of selected, peer reviewed papers from the 2014 4th International Conference on Engineering Materials, Energy,Management and Control (MEMC2014), June 21-22, 2014, Wuhan, China. The 113 papers are grouped as follows: Chapter 1: Materials Science, Processing and Application, Chapter 2: Energy, Power and Heat Engineering, Chapter 3: Construction and Civil Engineering, Chapter 4: Environmental and Chemistry Engineering, Chapter 5: Control Engineering and Monitoring, Chapter 6: Design and Modeling in Mechanics and Construction Engineering, Chapter 7: Management, Computation and Informati

Note: Description based upon print version of record. , Material Science, Engineering Research, Management and Information Technologies; Preface and Committee; Table of Contents; Chapter 1: Materials Science, Processing and Application; Research on Material of Steel Grid Strcuture with Assemble of Grid Frame of Museology Museum; Research on Material Selection Construction Method Construction Technology with the High-Support Formwork Construction of NingBo Cultrural Plaza Grand; Orthogonal Experimental Study on the Mixing Proportion of Reactive Powder Concrete , The Feature of Symmetric Frames and Two-Directional Vector Wavelets and Applications in Material Science; The Research of Dual Quarternary Pseudoframes for Hardy Space and Applications in Engineering Materials; Test Methods Research of Cracks in Ceramics Based on Genetic Algorithm; Application of Synthetic Substitute Materials on Reconstruction of Anterior Cruciate Ligament of Knee Joint in Exercise-Induced Injury; Composition Limy Binder with the Use of the Synthesized Aluminosilicates for Dry Construction Blends; Composite Nondestructive Testing Technology , Identification of Soluble Organic Compounds from Shengli Lignite in Toluene/Ethanol Mixed SolventCold-Start Emissions of an SI Engine Using Butanol/Gasoline Blends; The Research Status of the Preparation and Properties of the Tungsten Heavy Alloy; Dye-Sensitized Solar Cells Assembled with Modified Photoanode and Carbon Nanotubes as Counter Electrode; Synthesis and Characterization of Fluorine-Doped Tin Oxide Nanocrystals Prepared by Sol-Gel Method; Analysis and Probe of the Causes and Solution of Cracks of Precast Concrete Lightweight Partition Board , Conductive Silver-Modified TiO2 Nanoparticles Prepared by a Silver Mirror Reaction; Material Balance Method Combined with Hydrocarbon Generation Kinetics to Calculate the Efficiency of Hydrocarbon Expulsion; Preparation and Coagulation Performance of Polymeric Aluminum Zinc Ferric (PAZF) from Galvanized Aluminum Slag; Characteristic of a Novel Composite Inorganic Polymer Coagulant-PAZF Prepared from Industrial Wastes; A Novel Soft Paper Prepared by Hydrothermal Synthesis of Ultralong TiO2 Nanofibers; Separation and Acidic Solution Washing for Heavy Metals from Contaminated Soils , Effect of Scrap: Sponge Ratio on Mechanical and Corrosion Properties of Zr-1Nb-0.7Sn-0.1Fe Alloy; Microstructure and Deformability of Cast Zr-Nb-Fe-O Alloy with High Iron and Oxygen Content; Application of High Styrene Rubber Materials on Improved Tennis Performance; Study of Enhanced Surface Raman Scattering on Nano-Particle in Terahertz Range; Application of Green Packaging Material with a Necessary Analysis on the Packaging Design; Effect Analysis of Temperature on the Rubber Material Stress-Strain Relationship , Study of Performance on Reduce Fragility and Increase the Toughness of Fly Ash Ceramsite Concrete , English

Additional Edition: ISBN 3-03835-161-X

Language: English

Keywords: Electronic books.

URL: Click to View

UID:

Format: 1 online resource (584 p.)

Edition: 1st ed.

ISBN: 3-03826-445-8

Series Statement: Advanced Materials Research ; Volume 908

Content: Selected, peer reviewed papers from the 2014 2nd International Conference on Environmental Science and Material Application (ESME 2014), March 22-23, 2014, Wuhan, China.

Note: Description based upon print version of record. , Intro -- Materials Science, Environment Protection and Applied Research -- Preface, Committee and Sponsor -- Table of Contents -- Chapter 1: Materials Science and Processing -- Experimental Study on Connections of Superimposed Slabs -- Calculation and Analysis of the Thermal Performance of a New Type of Rock Wool Color Steel Sandwich Board -- Source Apportionment of Heavy Metals (Pb, Cd, As, Hg) in PM2.5 and PM10 in a City in China -- Effects of Copper Extraction-Stripping Loops on Entrainment in Aqueous Raffinate -- Improvement of Operational Reliability with Material Properties for Aircraft Equipment -- Application Research of Environmental Friendly Material for Architecture -- Test and Application of High Performance Concrete -- Study on the Brush Plating Technology of High-Temperature Alloy -- The Influences of Process Parameters on Properties of CrNx Coatings Deposited by Closed Field Unbalanced Magnetron Sputtering -- Synthesis and Characterization of a New Type of Highnuclear Lanthanide - Cobalt Carboxylate Cluster Complex -- Improvement Research of Organic Phenolic Gel being Used to be an Organic Deep Profile Control Agent -- Application of Titanium Metal Materials and Bone Tissue Engineering in Exercise-Induced Bone Injury Repair -- A Conductivity Model for Inequigranular Sandstones Based on Material Properties with Pore Geometric Conduction Theory and Effective Medium Conduction Theory -- Feasibility Study on Sprayed FRP Used in the Seismic Strengthening of Concrete Frame Joints -- Preparation and Dielectric Property of Al2O3 Surface Coating Modified BaTiO3/Polyimide Composite Film -- Corrosion of an Austenitic Heat-Resistant Steel HR3C in High-Temperature Steam and Supercritical Water -- Analysis on the Structure and Mechanism of Cracking and Spalling for Super304H Steel Oxide Films in High-Temperature Steam. , Research on a Surface Shot Peeling Process for Increasing the Anti-Oxidation Property of Super304H Steel in High-Temperature Steam -- Numerical Analysis on Heat Transfer and Oxidation Characteristics of High-Temperature Steam Pipes in Supercritical Units -- Study on Rock Conductive Law of Sandy Conglomerate Reservoir Based on Properties of Construction Materials -- Study on Calculation Formula of Seismic Shear Capacity of the Core of Concrete Frame Joint Strengthened by Sprayed FRP -- Study on the Corrosion Behaviour of Nickel-Base Alloy 625 in Landfill Leachate Treated by Supercritical Water Oxidation -- A Nonlinear Catastrophic Model of Isolated Rock Pillar Instability and its Chaotic Behaviour Based on Material Properties -- A Constitutive Model of Rocks under Uniaxial Tension -- Research on Package Materials with Properties of Packaging Materials for the Tianjin Port Throughput Prediction and Analysis -- Effect of Temperature on CO2/H2S Corrosion of Oil Tube Steels -- Study on Mechanical Properties of Rebar HRB400 after Corrosion -- Effect of Compression Storage on Adsorption Property of Silicone Rubber in Silicone Interfacial Systems -- Study on Structural Properties of Gallium and Titanium Doped Zinc Oxide Films Deposited by Magnetron Sputtering -- Research on the Construction Materials with the Construction Planning of Modern Industry Region in the Historic Cities: Taking the Luoyang in Henan Province as Example -- Study on Biological Materials with Flavonoid Active Compounds of Apocynum venetum L. -- Influences of Molding Pressure on Products Morphology and Carbonated Efficiency of Calcium Hydroxide -- Mechanics Performance of Cement Mortar Modified by Carboxylic Styrene Butadiene Latex -- Experimental Study on the Solubility of O2 and N2 in the Liquid Oil at Low Pressure -- Chapter 2: Chemical Materials and Technologies. , Effect of Na2WO4 Content on the Crystallization Temperature of NaCl-KCl-Na2WO4 Molten Salt System -- Effect of Na3WO3F3 Content on the Liquidus Temperature of NaCl-KCl-Na3WO3F3 Molten Salt System -- Study on the Conditions of Oxidation of Nitrogen Dioxide and Nitrite by Manganese Dioxide -- Study of Solubility of WO3 in the NaCl-KCl-NaF-WO3 Molten Salt -- Effect of Temperature on Solubility of WO3 in the NaCl-KCl-NaF-WO3 Molten Salt -- Nitrogen Removal with Nitrification and Denitrification via Nitrite -- Study on Sulfur Retention Characteristics for Bio-Briquette -- Performance of Sodium Chlorite/Urea on Simultaneous Desulfurization and Denitrification in a Rotating Packed Bed -- Simultaneous Absorption of SO2 and NO Using Sodium Chlorate/Urea Absorbent in a Rotating Packed Bed -- The Conjecture of Obtain C4H6O+ Fragments by Cyclicketone Ion Excited State -- Comparative Study on the Effect of Preparation of TiO2 and the Photocatalytic Degradation of Phenol Based on the Biological Template -- Synthesis of Inosine Polyphosphates from Inosine 5'-Phosphate -- A Novel Synthesis of Acyclovir Polyphosphates via Acyclovir Phosphoropiperidate Intermediate -- Practical Synthesis of β,γ-Bridging Oxygen-Modified Stavudine 5'-Triphosphates -- Efficient Synthesis of d4T Diphosphate and d4T Triphosphate -- Solid-Phase Synthesis of Pyrrole-Imidazole Polyamides by Resin -- Research on Biological Materials with Oxazinone Derivatives Induce Apoptosis in HT-29 Cells -- Aggregation-Induced Emission of New Tetraphenylethene-Thiophene Hybrid and Application as Sensitive Chemosensor -- The Analysis for Fluroxypyr Ester by Liquid Chromatography -- Contribution of H2 during the Two-Phase Anaerobic Digestion -- Review of Supercritical Water Oxidation in Hydrothermal Flames -- Chapter 3: Mechanical Engineering and Applied Mechanics. , Study on the Vortex Ring State of Helicopter and Flight Training Operation -- Comparison of Hydrodynamic Performance of Ducted Propeller and Ordinary Propeller on Trawler -- Research on Mechanical Dynamics in DC Servo Motor Adjustment System Based on Applied Technology -- Research on Mechanical Mechanics with Optimization and Upgrading of Public Bicycle System Based on "Wuhan" Mode -- Numerical Simulation of Unsteady Aerodynamic Loads over an Aircraft -- Testing Study and Mechanics Analysis on Fatigue Life of MSD Structure -- The Analysis and Research of Robust Performance Based on the Permanent Magnet Synchronous Linear Motor -- Influence of Gas-Liquid Distribution Inducer on Mass Transfer Coefficient in Rotating Packed Bed -- Finite Element Analysis of Drilling Frame on Down-the-Hole Drill Based on Mechanical Mechanics and Mechanical Properties -- Experimental Study on Critical Load of Compression Column with a Rectangular Cross-Section Based on Material Mechanics -- Down-the-Hole Drill Position Based on Mechanical Mechanics and Binocular Stereo Vision -- Mechanism Study on the Impact of Low Pressure Accumulator with Mechanical Mechanics to Hydraulic Impactor -- Experimental Study on the Influence of Injection Timing on Combustion and Emission of Biodiesel Engine Based on Mechanical Mechanics -- Stress Research and Finite Element Analysis of Pile Clamping Mechanism of Hydraulic Static Pile Driver -- Dynamic Analysis and Applied Technology in New Anti-Jamming Hydraulic System with Fast Response -- Study of Control Method Based on Hydromechanics for Hydraulic Impact of Open Hydraulic System in Concrete Pump -- Mechanical Mechanics and Calculation Method Research for Main Steam Flow of Turbine -- Mechanical Mechanics and Application of High Speed On/Off Valve to Feeding System of Hydraulic Drilling Rig. , Dynamic Analysis of Hammer Buffer System Using Pseudo-Bond Graph Simulation Method -- On the Strengthening Methods of Steel Grid Structures Lifting -- Studies on the Effect of Altitude on the Flammable Liquids' Flash Point -- Simulation of Two-Stage Fuel Reactor Chemical Looping Hydrogen Process Using Solid Fuel -- Chapter 4: Environment, Environment Protection and Energy Engineering -- Analysis and Design of Environmental Protection and Energy Saving in Modern Society Building -- Tourism-Related Pay for Environmental Services: An Important Tool for Environmental Management -- Study on the Optimal Use of Land from the Perspective of Soil Ecological Value -- Exploration of the Influence of the Environmental Temperature and Thickness of Fat on Heat Release -- Research of City Environmental Pollution and City Planning for the Future -- The Development Mode of the Livable Environment Construction of Shenyang Tiexi Old Industrial Relocation Zone -- Effect of EPS on Membrane Pollution in IMBR -- A New Prediction Method of Soil Pollution -- Study of Ecological Environment on Assessment Model of Ecosystem Damage Caused by Oil Spill in Ocean -- Research on Modern Urban Environmental Construction from Inspiration of the Chinese Ancient Ecological -- Research on Evaluation System and Environmental Construction for Energy-Efficiency about the Residential Buildings -- Analysis of the Atmospheric Visibility in Nanchang City and the Main Effect Factors -- Application of Video Capture Theory in Municipal Solid Waste Classification -- Technology Application and Stress Analysis in Quayside Container Crane's Design of New Energy-Efficient Power Generation System -- Comparative Environmental Analysis of the Effects of Different Salinity Levels on Growth and Physiological Status of Nipponbare Rice. , Research on Environmental Protection and Environmental Analysis of Travel Mode Choice under the Guidance of Environmental Protection Ideas. , English

Additional Edition: ISBN 3-03835-064-8

Language: English

Keywords: Electronic books.

URL: Click to View

UID:

Format: 1 online resource (505 p.)

Edition: 1st ed.

ISBN: 3-03826-295-1

Series Statement: Advanced materials research ;

Content: Selected, peer reviewed papers from the 2013 3rd International Conference on Material Engineering, Chemistry, Bioinformatics (MECB 2013), October 26-27, 2013, Hefei, China.

Note: Description based upon print version of record. , Advanced Research on Material Engineering, Chemistry, Bioinformatics III; Preface and Committee; Table of Contents; Chapter 1: Material Engineering and Applied Mechanics; Phase-Field Micro-Solidification Simulation for Dendrite Growth in Ni-Cu Binary Alloy; Research in Non-Isothermal Crystallization Kinetics of LDPE and Inorganic Particle Composite Films; Wear Mechanisms Analysis of Material 20Cr2Ni4A; Wind Tunnel Test of Effect of Sound-Absorbing Material on Lift of Two-Element Airfoil; Preparation of Compound Clinoptilolite Filter Material and Performance of Ammonia Nitrogen Removal , Silicon Based Compound Filter Material Strengthening A/O Bio-Filter Denitrification Performance Synthesis and Application of Manganese Oxide Based Nanomaterials; Study on the Giant Magnetostrictive Materials with Actuator Displacement Model Parameter Identification; Experimental Study on Freeze Thaw Resistance Concrete; A Comparative Analysis of the Performance of PVC Film Aging by Ultraviolet and Thermal Methods; Effects on the Properties of Polyethylene Film Aging by Different Methods , Research on Corrosion-Resistant Materials in Seawater with the Design Process and Research of AHTS's Modeling Research on Impermeable-Materials with the Elastic Wave CT Image Reconstruction of Quality of Cutoff Wall Based on SIRT Algorithm; The Material Mechanism Analysis of Airliner Forced Landing onto Water; The Importance of Reasonable Application of Materials in the Industrial Product Design; Study on Crystallization and Rheological Behavior of PEN/PET Blends; Research on the Influence of 500kV Power Engineering Materials Line Parameters to EFT/B , Electrochemical Investigation of Triadimenol as Corrosion Inhibitor for Copper in 0.5mol/L H2SO4 Solution Effect of Activator on Mechanical Properties and Porosity of Cement-Base Repair Mortar; Effects of Different Ultrasonic Frequency on Total Phenolic Contents of Extracts from Navel Orange Residue; Temperature Analysis of Piercing Process Based on Material Properties in Diescher's Mill with Finite Element Method; Study on Constant Tension Winch with PDF Controller Applications in Ocean Engineering; Chapter 2: Chemistry Engineering, Environment Engineering and Energy Engineering , The Condensation Reaction of 4-Nitrobenzaldehyde and Rhodanine Catalyzed by Papain Synthesis and In Vitro Anti-Inflammatory Activity of Pyrrolo[1,2-A]pyrazines via Pd-Catalyzed Intermolecular Cyclization Reaction; The Activity of Lipase in H2O/[Bmim]PF6 Microemulsions; Butanol Production Using Carbohydrate-Enriched Chlorella vulgaris as Feedstock; Study on Concentrate Tannin from Gallnut Extract by Membrane Integrated Method; Investigation of Y1-xCaxBaCo2O5+δ Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells; A Novel Strategy for the Synthesis of Azetidine , English

Additional Edition: ISBN 3-03785-914-8

Language: English

Keywords: Electronic books.

URL: Click to View

UID:

Format: 1 online resource (574 p.)

Edition: 1st ed.

ISBN: 3-03826-597-7

Series Statement: Advanced Materials Research, Volume 1014

Content: Collection of selected, peer reviewed papers from the 2014 4th International Conference on Industry, Information System and Material Engineering (IISME2014), July 26-27, 2014, Nanjing, China. The 120 papers are grouped as follows: Chapter 1: Materials Science, Processing and Application, Chapter 2: Mechanical Engineering and Applied Mechanics, Chapter 3: Energy, Power and Heat Engineering, Chapter 4: Construction and Civil Engineering, Chapter 5: Environmental Engineering, Chapter 6: Robotics, Control and Automation, Chapter 7: Applied Information Technologies, Data Processing and Computationa

Note: Includes indexes. , Advanced Research on Industry, Information System and Material Engineering IV; Preface and Committee; Table of Contents; Chapter 1: Materials Science, Processing and Application; Lamb-Wave-Based Damage Identification in Laminated Composite Plates; Eutecticum Morphology in Al-Si Alloys; Research on Protective Materials with Analysis of the Influence of Bulletproof Helmet Surface Curve on Bulletproof Performance; The Microorganism Mechanism: Test Evaluating of Microbial De-Oiling Efficiency; The Synthesis and Photocatalytic Properties of ZnO-SnO2 Nanorods Using Bamboo Charcoal as the Template , Austenite Recrystallization Model of High Ti Microalloyed SteelsInvestigation on Characteristics of Ni-Base Self-Fluxing Alloy Powders; Experimental Research on Mechanical Properties of SPS Composite Plate; Overview of Research Methods of Microscopic Pore Structure with Material Properties in Reservoir Rocks; Application and Realization of Liquid Automatic Drip System with Metallographic Polishing; Comparison Analysis on the Mechanical Properties of HSC and NSC after the Action of High Temperatures; Studies on Theory with Experiments of Materials Testing Technology Based on Teaching , The Method and Evaluation of Biological Materials to Functional Reconstruction of Ligament Defects in Exercise-Induced Ligament InjuryResearch on Biochemical Materials with Optimization of Microwave Extraction Process by Response Surface Methodology of Flavonoids from Platycarya strobi lacea sieb.et zucc.; Chapter 2: Mechanical Engineering and Applied Mechanics; Design on Operation Panel of Numerical Control Machine Tools; FEA on Ramp Plate of Scraper Conveyor Based on ABAQUS; Application of Steer-by-Wire Technologies on Wheel Loader , Research on Mechanical Manufacturing with Posture Optimization of Installation of the Bolts in Large Component AssemblyResearch and Application of Parametric Design in Traditional Plug-Flow Aeration Tank with Drawing Methods; Research on the Elevator System with Fault Diagnosis Method Based on Fuzzy Fault Tree; The Advances of the Prediction of the Performance and Reliability of Rolling Bearings with Poor Information; The Review of Nonlinear Dynamic Characteristics of Rolling Bearing Performances Based on Poor Information Theory , Analysis on the Effects of Atmospheric Turbulence on Line-of-Sight Ultraviolet Communication System PerformanceMechanics Analysis of Long Jump by Means of the Theory of Artificial Neural Networks; Research on Flow Sensor and the Pressure Sensor with Digital Asthma Diagnosis Technology; Aerodynamic Performance Evaluation with a New Method for Darrieus Wind Turbine; Research on Stress and Load with the Effect of Number of Teeth Planetary Gears Matching; Research on Wind Turbine Blade Loads and Dynamics Factors; Research on a Multi-Axis Wrist Force Sensor with Double Bending Beams , Research of Control Cooling Heat Treatment Process in the Ductile Iron Gear , English

Additional Edition: ISBN 3-03835-214-4

Language: English

Keywords: Electronic books.

URL: Click to View

UID:

Format: 1 Online-Ressource (circa 53 Seiten) , Illustrationen

Series Statement: Discussion paper series / Centre for Economic Policy Research DP19013

Language: English

Keywords: Graue Literatur

URL: Deutschlandweit zugänglich

URL: Deutschlandweit zugänglich

UID:

Format: 1 online resource.

ISBN: 9783527828722 , 3527828729

Note: Colloidal Molecules and Colloidal Polymers / Etienne Duguet, Etienne Ducrot, Serge Ravaine -- Self-assembly of Anisotropic Colloids in Solutions / Yiwu Zong, Huaqing Liu, Kun Zhao -- Self-assembly Enabling Materials Nanoarchitectonics / Katsuhiko Ariga -- Self-assembly of Colloidal Crystals: Strategies / Junchao Liu, Jingxia Wang, Lei Jiang -- 2D and (2+1)D Colloidal Photonic Crystal / Lijing Zhang, Jiaqi Han, Bofan Liu -- Structural Color due to Self-assembly / Yong Qi, Shufen Zhang -- Colloidal Photonic Crystal Sensors / Zhongyu Cai, Xiaoying Xu, Zihui Meng, Bushra Rafique, Ruixiang Liu -- Self-assembled Graphene Architectures for Electrochemical Energy Storage / Pei Li, Junwei Han, Quan-Hong Yang -- Patterning Assembly of Colloidal Particles / Minxuan Kuang, Yanlin Song -- Light Extraction Efficiency Enhancement in GaN-Based LEDs by Colloidal Self-assembly / Tongbo Wei -- Self-assembled Photonic Crystals for Solar Cells / Likui Wang -- Mesoporous Zeolites: Synthesis and Catalytic Applications / Feng Yu, Feng-Shou Xiao -- Colloidal Self-assembly of Block Copolymers for Drug Loading and Controlled Release / Guangze Yang*, Yun Liu*, Chun-Xia Zhao -- Heat Management by Colloidal Self-assembly / Qimeng Song, Marius Schöttle, Pia Ruckdeschel, Fabian Nutz, Markus Retsch.

Language: English

Keywords: Electronic books. ; Electronic books. ; Electronic books.

DOI: 10.1002/9783527828722

URL: https://onlinelibrary.wiley.com/doi/book/10.1002/9783527828722

URL: https://onlinelibrary.wiley.com/doi/book/10.1002/9783527828722

URL: https://onlinelibrary.wiley.com/doi/book/10.1002/9783527828722