Structure and function of the Ts2631 endolysin of Thermus scotoductus phage vB_Tsc2631 with unique N-terminal extension used for peptidoglycan binding

Plotka, Magdalena; Sancho-Vaello, Enea; Dorawa, Sebastian; Kaczorowska, Anna-Karina; Kozlowski, Lukasz P.; Kaczorowski, Tadeusz; Zeth, Kornelius

doi:10.1038/s41598-018-37417-6

Download PDF

Article
Open access
Published: 04 February 2019

Structure and function of the Ts2631 endolysin of Thermus scotoductus phage vB_Tsc2631 with unique N-terminal extension used for peptidoglycan binding

Magdalena Plotka ORCID: orcid.org/0000-0002-2871-8060¹,
Enea Sancho-Vaello²,
Sebastian Dorawa¹,
Anna-Karina Kaczorowska³,
Lukasz P. Kozlowski⁴,
Tadeusz Kaczorowski¹ &
…
Kornelius Zeth⁵

Scientific Reports volume 9, Article number: 1261 (2019) Cite this article

3772 Accesses
27 Citations
1 Altmetric
Metrics details

Subjects

Abstract

To escape from hosts after completing their life cycle, bacteriophages often use endolysins, which degrade bacterial peptidoglycan. While mesophilic phages have been extensively studied, their thermophilic counterparts are not well characterized. Here, we present a detailed analysis of the structure and function of Ts2631 endolysin from thermophilic phage vB_Tsc2631, which is a zinc-dependent amidase. The active site of Ts2631 consists of His30, Tyr58, His131 and Cys139, which are involved in Zn²⁺ coordination and catalysis. We found that the active site residues are necessary for lysis yet not crucial for peptidoglycan binding. To elucidate residues involved in the enzyme interaction with peptidoglycan, we tested single-residue substitution variants and identified Tyr60 and Lys70 as essential residues. Moreover, substitution of Cys80, abrogating disulfide bridge formation, inactivates Ts2631, as do substitutions of His31, Thr32 and Asn85 residues. The endolysin contains a positively charged N-terminal extension of 20 residues that can protrude from the remainder of the enzyme and is crucial for peptidoglycan binding. We show that the deletion of 20 residues from the N-terminus abolished the bacteriolytic activity of the enzyme. Because Ts2631 exhibits intrinsic antibacterial activity and unusual thermal stability, it is perfectly suited as a scaffold for the development of antimicrobial agents.

Diversity of the lysozyme fold: structure of the catalytic domain from an unusual endolysin encoded by phage Enc34

Article Open access 23 March 2022

Structure and function of bacteriophage CBA120 ORF211 (TSP2), the determinant of phage specificity towards E. coli O157:H7

Article Open access 21 September 2020

Exploiting phage receptor binding proteins to enable endolysins to kill Gram-negative bacteria

Article Open access 21 July 2020

Introduction

Upon completing replication and the assembly of new infectious virions, bacteriophages, viruses that infect prokaryotic cells, often rely on their lytic enzymes (endolysins) to release phage progeny from the host. In the cases of most double-stranded DNA bacteriophages targeting Gram-negative bacteria, the escape pathway follows three consecutive steps. Insertion of pore-forming small phage proteins called holins into the bacterial inner membrane first results in its permeabilization and then allows phage lytic enzymes (endolysins) to enter the periplasm¹. Finally, endolysins degrade the exposed peptidoglycan (PGN) layer before additional phage proteins (spanins) disrupt the outer membrane and enable the descendant virions to be liberated from the lysed bacterial cells². The ability of endolysins to attack peptidoglycan, the most characteristic structure vital for bacterial survival, makes these enzymes an interesting subject to study from a practical point of view, especially in the context of increasing antibiotic resistance. Endolysins also can kill susceptible bacteria when applied exogenously as recombinant proteins². The features of endolysins desired for their function as potential novel antimicrobial agents are their high stability and resistance to proteolysis and chemical denaturation^3,4. As these physical properties are common among enzymes of thermophilic microorganisms, we focused our research on lytic enzymes encoded by bacteriophages thriving in extreme thermophilic environments.

Bacteriophage vB_Tsc2631 was isolated from a hot spring of the Hveragerði geothermal area, Iceland⁵. This lytic phage can use the thermophilic bacteria Thermus scotoductus MAT2631 and Thermus thermophilus HB8 as host cells for propagation. The vB_Tsc2631 genome encodes the Ts2631 endolysin (156 aa), an N-acetylmuramoyl-L-alanine type 2 putative amidase that cleaves the amide bond between the sugar moiety and the peptide in PGN structures⁵. The protein is unusually stable, with a melting temperature 99.8 °C that ranks it among the most thermostable enzymes^5,6.

A comparative in silico analysis of the amino acid sequence of Ts2631 endolysin indicated that this enzyme is a structural homolog of phage T7 lysozyme and belongs to a large superfamily including three families of proteins capable of binding bacterial PGN. The first such family is exemplified by the T7 lysozyme itself, the best studied example of type 2 amidases. T7 lysozyme is a globular and monomeric protein possessing a single enzymatically active domain with a Zn²⁺-binding site formed by essential histidines and a cysteine residue in the catalytic center⁷. The second family contains enzymes of bacterial origin acting as autolysins, specifically AmpD-type amidases, which degrade PGN during cell-wall recycling⁸. The third group, called the PGN recognition proteins (PGRPs), was more recently discovered in eukaryotes⁹. They are involved in innate immunity and control the levels of symbiotic microorganisms, but only a few have amidase activity. For example, mammals have four PGRPs, but only one of them (PGLYRP2) is an amidase^10,11. Nevertheless, all these proteins contain at least one so-called PGRP domain, which is structurally similar to T7 lysozyme and Ts2631 endolysin. Crystal structures of T7 lysozyme and a few PGRPs from Drosophila melanogaster and Homo sapiens have been determined^10,12,13,14.

Here, we report the first crystal structure of an endolysin from a thermophilic bacteriophage. We analyzed the structure and sequence of Ts2631 endolysin and prepared 24 point mutation variants and one N-terminal deletion variant to determine residues that (i) are essential for lytic activity and (ii) are responsible for PGN binding. In substrate binding analysis, special attention was paid to those residues whose counterparts in PGRPs form the PGN-binding pocket.

The Ts2631 endolysin contains a 20 residue extension at the N-terminus with a unique motif rich in arginines that is not homologous to any other protein sequence present in the UniProt database. The role of the N-terminal region in both the antibacterial and substrate binding activity of Ts2631 endolysin has been investigated. Using this unique N-terminal sequence for the design of fusion proteins might become a platform for the development of novel protein antibiotics targeting Gram-negative bacteria.

Results

The structure of Ts2631 endolysin

Ts2631 endolysin crystals in space group P2₁2₁2₁ diffracted to 1.95 Å resolution, and the structure was determined by the molecular replacement method using the coordinates of T7 lysozyme as a search model (PDB entry: 1LBA)⁷. The data collection and refinement statistics are summarized in Table 1. There are two molecules in the asymmetric unit and the Cα positions of these molecules (residues 16–156) superimpose with a low r.m.s.d. (0.6 Å). Only the flexible N-terminal region shows structural variability, which is due to a deviation of the two molecules from perfect twofold non-crystallographic symmetry (Fig. 1). The two monomers in the asymmetric unit interact with each other via the N-terminus and an interaction of the N-terminal extension with the globular domain (Fig. 2A). Initially, we reasoned that this interface might be involved in dimerization, but biochemical data based on analytical ultracentrifugation together with a detailed analysis using PISA software (PISA score: 0.25) pointed towards the monomer as the dominant form in solution (Supplementary Fig. S1)¹⁵. Given the evolutionary relationship of Ts2631 endolysin with PGRPs, we analyzed their structural similarity to Ts2631 endolysin in more detail. When the dimeric Ts2631 protein (molecules A and B) was superimposed onto proteins with the PGRP fold (PDB entries: 2EAX for human PGRP-I beta and 1SK4 for human PGRP-I alpha), it became clear that the N-terminal extensions indeed form a 3D swap. When the core domain of molecule A (residues 16–156) was superimposed on PGRP, the N-terminus of molecule B superimposed well on the N-terminus of the PGRP protein (Supplementary Fig. S2). Therefore, we constructed a monomeric structure using the globular domain (residues 14–156) of monomer A and the N-terminus of monomer B (residues 1–13) and vice versa (Fig. 2B). Both monomers modeled in this way are identical, and in each monomer, three hydrogen bonds (Trp7′/Lys70″, Arg9′/Glu41″ and Tyr11′/Glu48″) loosely connect the N-terminus to the enzyme core domain (Fig. 2B).

Table 1 Data collection and refinement statistics.

Full size table

Molecular architecture of the endolysin active site

The Ts2631 endolysin structure displays a mixed fold of a five-stranded β-sheet (β1-β5) that is flanked by helices α2 and α3, one from each side, yielding a sequential secondary structure sequence of α1/β1/β2/α2/β3/β4/α3/β5/α4 (Fig. 3A). Only the C-terminal helix (α4) does not interact with the central β-sheet, but it is connected to α3 via hydrophobic interactions. The overall protein sequence shows a surplus of nine positive charges, and these charges consequently dominate the surface properties around the putative PGN-binding site and the N-terminal extension (Fig. 3B). The active site is located in the center of the globular fold and is composed of two histidine residues (His30, His131) and Cys139, all of which are buried inside the structure, which has an elongated cleft-like architecture (Fig. 1). His30 is located on β2, while His131 and Cys139 are located on a flexible loop structure connecting β5 with α3 (Fig. 3A,C). Residues on this loop structure of both monomers show higher B-factors and hence higher mobility, which may allow adaptation to substrate binding (Fig. 3C). A water molecule stabilized by the conserved residue Tyr58 completes the tetragonal coordination sphere of Zn²⁺ (Fig. 3C).

Ts2631 endolysin homologs show variation in the catalytic center

The T7 phage lysozyme and human PGLYRP2 possess the same active site residues as Ts2631 endolysin (Fig. 4A and Supplementary Fig. S3). Eukaryotic PGRPs have a similar fold as phage endolysins; however, most PGRPs recognize but do not degrade PGN due to differences between their active site residues and those of phage endolysins (e.g., Cys/Ser, His/Ile; see Supplementary Fig. S3 for a structural alignment of T7-like proteins). The PGRP structures most similar to the Ts2631 endolysin structure are those of the human PGRPs PGRP-Iα and PGRP-Iβ (PDB entries: 1SK4 and 2EAX, respectively) (Fig. 4B; Supplementary Fig. S2). In the superposition models of Ts2631 endolysin and the complex structure of human PGRP, the common substrate N-acetylmuramyl-L-Ala is 2.3 Å distant from the Zn²⁺ ion of the Ts2631 enzyme (Fig. 4B). This distance is ideal for bond activation and hydrolysis, indicating that this structure is conserved between the two scaffolds. In the bacterial autolysin AmpD, the active site is changed to a His/His/Asp triad binding Zn²⁺, where the aspartic acid residue replaces Cys139 of the Ts2631 endolysin (Fig. 3C and Supplementary S3).

Selection of residues for site-directed mutagenesis

To determine the residues responsible for the lytic and substrate binding activity of the Ts2631 endolysin, we analyzed the structure of human PGRP-Iβ (PDB entry: 2EAX) co-crystallized with a muropeptide¹⁰. We found that the sugar and peptide moieties of the PGN ligand interact with PGRP-Iβ via Thr241, Tyr274, Asp301, Arg353, and Thr354 (Supplementary Fig. S4A) and that these residues correspond to Thr32, Tyr58, Asn85, Val135 and Thr137 in Ts2631 endolysin, respectively (Supplementary Fig. S4B). Most of these residues are also conserved in the T7 lysozyme, but Thr137 is replaced by a lysine, which is the same difference that is observed in AmpD⁸. In silico analysis of the Ts2631 endolysin sequence (https://www.ncbi.nlm.nih.gov/protein/677570412) highlights twelve residues that might be responsible for interactions with the substrate (Supplementary Fig. S3). Those residues are His31, Thr32, Pro54, Tyr58, Leu72, Ile79, Asn85, His131, Val135, Thr137, Glu138 and Cys139 (residues in boldface type indicate amino acids that are critical for lytic activity). These residues were subjected to further analysis.

We also analyzed the Ts2631 endolysin structure to identify conserved and surface-exposed amino acids that may have an additional effect on protein activity and PGN binding (Supplementary Fig. S5). In total, we constructed the nineteen Ts2631 endolysin single-residue substitution variants listed in Table 2. Previously, we have shown that the activity of five substitution variants forming the catalytic core was significantly less than that of the wild type⁵. Here, these variants (H30N, Y58F, H131N, T137K and C139S), which had been constructed and purified previously⁵, served as a control in an experiment in which we tested the effect of surface-exposed amino acids on the lytic activity of the Ts2631 endolysin.

Table 2 Summary of properties of Ts2631 endolysin variants.

Full size table

Lytic activity of Ts2631 endolysin variants

We used a turbidity reduction assay (TRA) to spectrophotometrically measure decreases in the turbidity of suspensions of chloroform-treated (outer membrane-permeabilized) T. thermophilus cells at 60 °C after the addition of selected endolysin variants. For most substitution variants, the lytic activity exceeded 50% that of the wild-type protein (Fig. 5, Table 2). The activity of the N85A mutant was undetectable by this assay under the conditions that were used. Moreover, a high reduction in the activity of the C80A variant was observed, remaining at an average level of 15% (Fig. 5). Both variants were soluble, with no signs of aggregation and significant structural changes as evaluated by circular dichroism spectrum analysis (Supplementary Fig. S6). This result excluded the possibility that improper protein folding had an impact on the lytic function of C80A and N85A variants.

To our surprise, the substitution of many conserved amino acids had no effect on the enzyme lytic activity at 60 °C. Therefore, we decided to lower the reaction temperature to 37 °C, slowing the reaction and potentially allowing the observation of more pronounced differences between the reactivity of Ts2631 endolysin variants. At 37 °C, we noticed no lytic activity in case of the Y60A mutant and reduced activity by three other variants: H31A, T32A and K70A, which reached no more than 17.2% of the activity of the wild-type enzyme (Fig. 6A). These results were further validated by a zymogram technique, which is not a quantitative method but is more sensitive than the TRA (Fig. 6B, whole gels in Supplementary Fig. S9A). Zymograms showed a pattern of lytic activity of Ts2631 endolysin variants that was similar to that provided by the TRA at 37 °C. Polyacrylamide gel electrophoresis of purified endolysin and its variants served as a loading control, showing that equal amount of proteins were subjected to the analysis (Fig. 6C, whole gels in Supplementary Fig. S9B). Residues His31, Thr32, Cys80 and Asn85 are situated in the PGN-binding groove of Ts2631 endolysin (Supplementary Fig. S4B).

Peptidoglycan binding tests of Ts2631 endolysin variants

To go one step further in our analysis of the Ts2631 endolysin ability to bind PGN, we applied a methodology developed previously by another research group⁹. This method was routinely used in the case of wild-type PGRPs and was used here for the first time to investigate the binding of the endolysin and its substitution variants to a large PGN polymer. We purified the PGN of T. thermophilus HB8 and performed protein-substrate binding assays of all Ts2631 endolysin variants. Wild-type Ts2631 endolysin was used as a positive control, and carbonic anhydrase from bovine erythrocytes (29 kDa) served as a negative control. Out of the 24 tested single-substitution variants of Ts2631 endolysin, only two, Y60A and K70A, did not bind the purified and insoluble PGN. Both Y60A and K70A were predominantly not bound to PGN and thus present in the supernatant fraction (Fig. 7A, Table 2, selected full-length gels are in Supplementary Fig. S10). The crystal structure data show that the two residues lie in close proximity to each other but opposite to the PGN-binding cleft (Fig. 7B,C). These results are the first to show the endolysin surface residues, other than the residues present in the PGN-binding groove, that play a role in substrate binding.

Function of the N-terminal extension in peptidoglycan binding

Homology searches for the Ts2631 endolysin N-terminal extension (residues 1–20) using the T-Coffee computer program¹⁶ have shown that it does not share amino acid sequence identity with any particular sequence in databases (Supplementary Fig. S7, sequence data for the phage database; data for the entire sequence database is not shown). Nevertheless, this N-terminal extension is positively charged, making it similar to polycationic antibacterial peptides, which kill bacteria by forming pores in the cell membrane¹⁷. To investigate the role of this unique N-terminal extension, we constructed a deletion variant of Ts2631 lacking amino acids 2–29 (Ts2631Δ2-29). Unfortunately, attempts to purify Ts2631Δ2-29 were ineffective due to the aggregation of the protein. Consequently, a shorter variant missing residues 2-22 was constructed and successfully purified (Fig. 8A). This Ts2631Δ2-22 variant was fully active at 60 °C towards chloroform-treated cells (Table 2). To further analyze the importance of the N-terminal extension in substrate anchoring, we used the PGN binding assays described above. The results showed that Ts2631Δ2-22 was present in both the PGN-unbound and PGN-bound fractions, suggesting a role of the N-terminal extension in binding Ts2631 endolysin to its substrate (Fig. 7A). In a parallel experiment, we tested the ability of Ts2631 endolysin to lyse intact bacteria that had not been treated with chloroform. All previous experiments were carried out with bacteria that had their outer membrane permeabilized by treatment with chloroform-Tris-HCl to expose PGN¹⁸. Upon the addition of the wild-type endolysin to intact T. thermophilus cells, we observed a reduction in the turbidity of the cell suspension, indicating the antibacterial role of Ts2631 endolysin (Fig. 8B). In contrast, the Ts2631Δ2-22 variant fully active against outer membrane permeabilized cells (100% activity) was not functional in the presence of intact T. thermophilus HB8 and showed no signs of lysis after extended (3 h) incubation (Fig. 8B). This result suggests that the N-terminal extension allows endolysin to pass through the outer membrane and then interact with the PGN layer.

Discussion

Studies on novel endolysins are important for the development of effective antimicrobial agents as alternative to traditional antibiotics^2,19,20. The Ts2631 endolysin is the first lytic enzyme from a thermophilic bacteriophage whose structure has been determined. The catalytic core is formed by His30, His131 and Cys139, a catalytic motif also present in the T7 lysozyme molecule⁷. The crystal structure data are also supported by our previous study in which we have shown that modification of catalytic core residues substantially reduces the Ts2631 endolysin lytic activity⁵.

In contrast to T7 lysozyme, Ts2631 endolysin contains a unique N-terminal sequence that is not found in the phage homologs. Crystallographic and in silico data indicate that this positively charged N-terminal extension of Ts2631 endolysin is flexible and may assume alternative conformations, as depicted by loop modeling via the Modeller program (Fig. 9)^21,22. This spatial conformation suggests that the N-terminal extension interacts with negatively charged bacterial membranes and PGN. Interestingly, the eukaryotic PGRPs also have the N-terminal PGRP-specific region¹¹, which is usually hydrophobic, varies among these proteins and shows no amino acid sequence resemblance to Ts2631 endolysin⁵. However, similarly to the N-terminal extension of Ts2631 endolysin, the N-terminal region comprising residues 12–33 of the Drosophila amidase PGRP-LB was shown by crystallography to be located at the back of the active site¹². The role of this region in PGRP-LB is still unknown, although its function in binding additional ligands has been proposed but not supported by experimental data¹². Thus, our experiments with a deletion variant of Ts2631 endolysin deprived of the N-terminal extension may shed some light on the general function of the N-terminal region.

Unique among lytic enzymes is also a short polyglycine stretch of four consecutive residues at the C-terminus of Ts2631 endolysin (Supplementary Fig. S7). The only protein with this polyglycine track in the literature was the precursor of the protein translocation channel of the outer envelope membrane of chloroplasts. There, the polyglycine track was shown to be necessary for directing the protein to the chloroplast outer membrane²³. We hypothesize that by analogy, the four-glycine segment of Ts2631 endolysin might be employed to target bacterial membranes.

The crystal structure, supported by biochemical data, helped us to reveal the substrate-binding location of Ts2631 endolysin. His31 and Thr32 are part of the HHT motif characteristic for PGRPs^5,19. The residue Cys80 is conserved in 94% of all insect and mammalian PGRPs and is required for their proper conformation²⁴. Surprisingly, this cysteine is not preserved in the phage T7 lysozyme⁷. Asn85 is also conserved among PGRPs, and its role in accommodating the fourth D-Ala residue of the PGN stem peptide was previously proposed for PGRP-IαC²⁵. Therefore, by analogy to PGRPs, whose corresponding residues are located in the PGN-binding cleft, we propose a role of the above-mentioned residues in substrate binding.

In addition, two other residues, Tyr60 and Lys70, are essential for PGN interactions. Both of these residues are present in the primary sequences of Ts2631 and Ph2119 endolysins derived from Thermus scotoductus thermophilic phages but are not conserved among mesophilic PGRPs (Supplementary Fig. S7). Their location at the back of the PGN-binding groove was surprising, as the literature search did not provide any examples resembling this kind of protein spatial architecture. The binding to the PGN may be explained by possible CH-π interactions between aromatic residues (such as Tyr) and the glycan strands of the PGN. The interaction may be further stabilized by hydrogen bonds via a water molecule between glycan and Lys^26,27. Therefore, both Tyr60 and Lys70 may have roles in binding to the glycan moiety.

The general pattern of interaction between the endolysin molecule and the PGN mesh remains unknown. The perpendicular model of the bacterial cell wall visualizes PGN as a honeycomb²⁸. It was previously proposed for the human PGRP-IβC that the protein is located in a ≈120 Å in diameter, incomplete pore of PGN formed in growing cell walls¹⁰. In that model, PGRP-IβC interacts with PGN by its PGN-binding groove while the opposite site of the molecule remains unconnected to the substrate. In agreement with that pattern, Ts2631 endolysin residues His31, Thr32, Cys80 and Asn85, which are located in the PGN-binding groove, may be responsible for interacting with the substrate. Moreover, based on our experimental data, we propose a scenario in which Tyr60 and Lys70—the residues situated opposite to the active site—also dock the protein within PGN pores. Both residues are present in the Ts2631 Δ2-22, therefore, the variant without the N-terminal region can maintain partial PGN binding.

We stipulate that this arrangement might be an adaptation by thermophilic phage endolysins to function at elevated temperatures, where stronger docking of endolysin to the PGN would improve the overall performance of the lytic enzyme.

The unusual thermostability (a melting temperature of 99.8 °C) is a striking feature of Ts2631 endolysin⁵, although, on average, proteins derived from thermophiles have a melting temperature 31.5 °C higher than that of their mesophilic homologs²⁹. The current view is that enzyme adaptations made to withstand high temperature involve increased compactness of protein hydrophobic core, metal ion binding, replacing polar residues with charged residues, shortening surface-exposed loops, increasing the number of disulfide bonds and forming salt bridges between pairs of charged residues³⁰. To elucidate the structural determinants of Ts2631 endolysin thermostability and temperature-dependent activity, we analyzed the endolysin amino acid sequence. Factor that might contribute to the stabilization of Ts2631 endolysin is the formation of extended hydrophobic cores by the high number of tryptophans (4.49%) (Supplementary Fig. S8A). In mesophiles, the percentage of tryptophans on average does not exceed 1.27%³¹. Trp residues in well-buried states are known to participate in cation-π interactions that maintain the conformational stability of protein structures³², and a higher frequency of cation-π interactions in well-buried states might be correlated with protein thermostability³³. Moreover, the percentage of prolines (8.5%) is clearly greater than the average content of prolines in mesophilic proteins (6.3%)³⁴. These residues are evenly distributed throughout the protein (Supplementary Fig. S8B) and locally lower the B-factors, indicating their stabilizing effect. It has been postulated that abundance of prolines and small-volume residues may minimize hindrance and entropy expenditure due to the side chain burial, thus favoring looping and bending in proteins and leading to the formation of compact core regions in thermophilic protein structures³⁵. Finally, arginine residues are also implicated in thermal stability due to their guanidinium-like head group, which can have various interactions with ions³⁶. These features are clearly distinct from those of mesophilic phage endolysins and may explain the observed thermostability of proteins such as the Ts2631 endolysin. Obviously experimental data are necessary to fully understand the thermal stability pattern of Ts2631 endolysin and such analysis will be carried out within the framework of a future project.

As thermostable proteins are superior in medical and technical processes^37,38,39 due to their rigid structure and protease resistance, thermostability is a desired feature of any novel enzyme considered for potential applications. Ts2631 endolysin fulfills this requirement. Additionally, it not only is an extremely stable phage endolysin but also carries a natural Arg-rich N-terminal extension, which may help the protein interact with bacterial membranes when applied as an external antimicrobial agent.

Materials and Methods

Bacterial strains and growth conditions

Chemically competent Escherichia coli DH5α and BL21(DE3) cells (Invitrogen) were prepared for site-directed mutagenesis and recombinant protein expression, respectively. These bacteria were cultivated at 37 °C in Luria Broth (LB) medium with shaking. T. thermophilus HB8 was cultured as previously described⁵. The plasmid pLT1 (a derivative of the pET15b vector) was used for the overproduction of Ts2631 endolysin and served as a template for site-directed mutagenesis studies of Ts2631 endolysin⁵. The plasmid pRARE (Cm^R) served as a source of tRNAs for E. coli rare codons (Novagen) to compensate for codon usage bias. When necessary, media were supplemented with 100 µg ml⁻¹ of ampicillin (Ap) and 30 µg ml⁻¹ of chloramphenicol (Cm). The plasmid pLT1, overexpressing the Ts2631 endolysin gene, as well as plasmids used for the overproduction of the Ts2631 endolysin variants constructed in the present study, were deposited in the Collection of Plasmids and Microorganisms, University of Gdansk, Poland (KPD, World Data Center for Microorganisms registered no. 1084).

Protein overproduction and purification

E. coli BL21(DE3)[pRARE] cells carrying the expression plasmids were cultivated at 37 °C in 500 ml of LB to an OD₆₀₀ of 0.4–0.5. Overproduction of Ts2631 endolysin and its derivatives was induced with 1 mM isopropyl-β-D- thiogalactopyranoside (IPTG) for 4 h at 37 °C. The cells were subsequently harvested by centrifugation (10,000 × g for 20 min, 4 °C). The cell pellet was resuspended in 30 ml of NPi buffer (50 mM NaH₂PO₄, pH 8.0, 300 mM NaCl, 10 mM imidazole, 0.1% Triton X-100, 10% [vol/vol] glycerol, 2 mM β-mercaptoethanol, and 1 mM phenylmethylsulfonyl fluoride [PMSF]) and disrupted by sonication (30 bursts of 10 s at an amplitude of 12 μm). The cellular debris was removed by centrifugation (10,000 × g for 20 min, 4 °C), and overproduced proteins were purified from clarified supernatants on TALON cobalt metal affinity resin according to the manufacturer’s procedure for bath/gravity-flow column purification (Clontech Laboratories, Inc., USA). Proteins bound to the TALON resin were eluted with 150 mM imidazole in NPi buffer, and pooled fractions containing pure proteins (as judged by SDS-PAGE) were dialyzed against D buffer (25 mM potassium phosphate buffer, pH 8.0, 50 mM KCl, 0.1% Triton X-100, 50% glycerol, and 0.1 mM ZnSO₄). For crystallography studies, the Ts2631 endolysin was dialyzed against 20 mM MES buffer, pH 6.0. The Bradford assay was used to determine the protein concentration⁴⁰, and purified proteins were stored at −80 °C until further analysis.

Crystallization, data collection and structural analysis

Protein at a concentration of 8 mg ml⁻¹ was applied to commercial screens from Hampton Research, which yielded crystals under conditions of 20% PEG 3350 and 0.2 mM disodium tartrate. The crystals were mounted using the reservoir conditions with an additional 20% PEG 400 for cryo-protection. Crystals were flash frozen in liquid nitrogen, and data were collected at the ALBA synchrotron at 100 K. Diffraction data were recorded on a PILATUS 6 M detector, and spots were integrated and scaled with the XDS/XSCALE software package. Molecular replacement was performed with Phaser, which was included in the PHENIX program package⁴¹, and the structure was refined in PHENIX and rebuilt in Coot⁴². The final R/R_free-values are 20 and 24%, respectively (Table 1).

Site-directed mutagenesis

Ts2631 endolysin residue A33 was substituted with glycine, resulting in the A33G variant. Eighteen residues (H31, T32, P54, Y60, R64, D65, R67, Y69, K70, L72, I79, C80, N85, G95, D96, N133, V135 and E138) of Ts2631 endolysin were individually substituted with alanine. Ts2631 endolysin variants (H30N, Y58F, H131N, T137K and C139S) were constructed previously⁵ and used herein for lytic activity comparison studies. Site-directed mutagenesis was performed according to the QuikChange II Site-Directed Mutagenesis Kit manual (Agilent Technologies). Primers used in this study are listed in Supplementary Table S1. All constructs were verified by DNA sequencing before being introduced into the E. coli BL21(DE3)[pRARE] expression strain by chemical transformation.

Lytic activity of Ts2631 endolysin

For turbidity reaction assays, the outer membrane of Gram-negative T. thermophilus HB8 bacteria was permeabilized by chloroform treatment, as described previously¹⁸. Briefly, bacteria were grown until late-exponential phase and then centrifuged (4,500 × g, 15 min, 4 °C). The outer membranes of sedimented cells were permeabilized by gentle shaking with chloroform-saturated 50 mM Tris-HCl, pH 7.7 for 45 min at room temperature. The permeabilized cells were then washed, resuspended in 10 mM phosphate buffer (pH 8.0) and adjusted to OD₆₀₀ = 1.0. The turbidity reaction assays were performed in a 96 well plate format by measuring the OD₆₀₀ drop over time (with 0.5 min intervals up to 20 min) in an EnSpire multimode plate reader (PerkinElmer). Each reaction was conducted in triplicate and consisted of 190 μl of permeabilized cells and 10 μl of tested proteins (final concentration 25 μl ml⁻¹). The values of negative controls with reaction buffer instead of endolysin were subtracted from the sample measurements. The lytic activity was calculated as follows: [ΔOD₆₀₀ sample (endolysin added) − ΔOD600 (buffer only)]/initial OD₆₀₀. Assays with intact bacteria were conducted as described above, but the permeabilization step was omitted in the procedure. Zymogram qualitative assays were performed with the use of 12.5% SDS-PAGE; the separating gel contained 0.2% (wt/vol) chloroform-treated T. thermophilus HB8 as a substrate. Ts2631 endolysin and its derivatives were mixed with 2× Laemmli buffer (Bio-Rad) and loaded into the gel. After electrophoresis, the gel was gently shaken at 37 °C for 16 h in a solution of 25 mM phosphate buffer, pH 8.0, and 1% Triton X-100, washed once with water and then stained for 0.5 h with 1% methylene blue in 0.01% KOH. After washing the gel in ultrapure water, the lytic activity of individual protein bands was observed as a clear zone.

Peptidoglycan isolation

PGN was extracted from T. thermophilus HB8 cells by following a method described previously⁴³ with a few modifications. Briefly, T. thermophilus HB8 cells were grown in a 500 ml flask at 60 °C to an OD₆₀₀ of 0.7–0.8. After centrifugation (5,000 × g, 10 min, room temperature), the cell pellet was suspended in 3 ml of 1× phosphate-buffered saline (PBS). The solution was transferred to 50 ml tubes with 6 ml of 6% sodium dodecyl sulfate (SDS) and then placed in a boiling water bath. After 3 h of boiling, the water bath heat source was turned off, and the mixture was left overnight to slowly cool to room temperature with stirring at 500 rpm. The next day, to remove SDS, the suspension was centrifuged (40,000 × g, 20 min, room temperature), and the pellet was suspended in ultrapure water. Centrifugation/washing steps were repeated three times, and in the last cycle, the pellet was suspended in a solution of 900 µl of 10 mM Tris-HCl, pH 7.2, and 0.06% w/v NaCl. Pronase E (100 µg ml⁻¹ final concentration) was added to the sample, and the mixture was incubated at 60 °C for 2 h. Pronase E digestion was stopped by adding 200 µl of 6% SDS and boiling the sample (100 °C, 30 min). To remove SDS, the suspension was subjected to three centrifugation/washing steps, as described above. In the last centrifugation/washing step, the sample was resuspended in 200 µl of 50 mM sodium phosphate buffer (pH 4.9), frozen in liquid nitrogen and left at −80 °C for further analysis.

Peptidoglycan binding assay

The PGN binding assays were carried out as described previously⁹. Briefly, 40 μl of purified proteins (Ts2631 endolysin substitution variants, wild-type Ts2631 endolysin and deletion mutant Ts2631Δ2-22) at a concentration of 90 μg ml⁻¹ was mixed with 120 μl of T-M buffer (10 mM Tris maleate buffer, pH 6.5, 0.15 M NaCl) and 160 μl of the PGN washed and suspended in T-M buffer (190 µg per sample) and then incubated at 4 °C for 30 min. The mixtures were then centrifuged at 12,600 × g for 5 min at 4 °C, the supernatants were kept for analysis, and the pellets were washed four times with 300 μl of T-M buffer with 1 M NaCl to remove any residual unbound proteins. After a final centrifugation, washed PGN was extracted with 80 μl of a solution of 62.5 mM Tris-HCl, pH 6.8, 2% SDS, 19% glycerol, and 5% β-mercaptoethanol. The supernatant (20 μl) and extract (20 μl) of the sedimented PGN were subjected to Tricine-SDS-Page and stained with Coomassie brilliant blue. In the pilot experiments, bovine serum albumin (66.46 kDa; Sigma-Aldrich) was successfully applied as a negative control, but for the PGN binding assay, we decided to use protein with a similar molecular weight (the Mw of Ts2631 endolysin is 20.8 kDa; Supplementary Fig. S1). Therefore, a carbonic anhydrase (EC 4.2.1.1) from bovine erythrocytes (29 kDa; SERVA) was used as a negative control.

Analytical ultracentrifugation

Sedimentation velocity experiments were performed in a Beckman-Coulter ProteomeLab XL-I analytical ultracentrifuge (Fullerton, USA) equipped with AN-60 Ti 4-hole rotor and 12 mm path length, double-sector charcoal-Epon cells loaded with 400 μl of sample and 410 μl of buffer (20 mM MES, pH 6.0, 150 mM NaCl). The experiments were carried out at 4 °C and 50,000 rpm using continuous scan mode and a radial spacing of 0.003 cm. Scans were collected in 5 min intervals at 280 nm. To verify that dimeric structures were formed not only in crystal but also in solution, we investigated the possibility of concentration-dependent oligomerization. To test that, three different protein samples were used: 1.10 OD, 0.62 OD, and 0.34 OD (at 280 nm) for a 1.2 cm path length. The fitting of absorbance versus cell radius data was performed using SEDFIT software, version 14.7⁴⁴ and a continuous sedimentation coefficient distribution c(s) model covering the range from 0.0–4S. The confidence level was set to 0.68. The biophysical parameters of the buffer, the density and viscosity at 4 °C and the protein partial specific volume (V-bar) were estimated using SEDNTERP software (version 1.09, http://www.jphilo.mailway.com/download.htm). The value of the protein V-bar was calculated to be 0.726 cm³ g⁻¹ (4 °C).

Circular dichroism spectra

Circular dichroism spectra were recorded using a JASCO J-815 spectropolarimeter with a path length of 1 mm. Proteins were dissolved in 10 mM potassium phosphate buffer, pH 8.0, and 150 mM ammonium sulfate at a final concentration of 0.15 mM. Each circular dichroism spectrum represents the average of six scans.

Data Availability

All data generated or analyzed during this study are included in this article (and its Supplementary Information Files). Accession number for nucleotide sequence of Ts2631 endolysin is KJ561354. PDB entries for Ts2631 endolysin, T7 lysozyme, PGRP-I alpha and PGRP-I beta are 6FHG, 1LBA, 1SK4 and 2EAX, respectively.

References

Young, R. Phage lysis: three steps, three choices, one outcome. J Microbiol 52, 243–258, https://doi.org/10.1007/s12275-014-4087-z (2014).
Article CAS PubMed PubMed Central Google Scholar
Nelson, D. C. et al. Endolysins as antimicrobials. Adv Virus Res 83, 299–365, https://doi.org/10.1016/B978-0-12-394438-2.00007-4 (2012).
Article CAS PubMed Google Scholar
Chakravorty, D., Khan, M. F. & Patra, S. Multifactorial level of extremostability of proteins: can they be exploited for protein engineering? Extremophiles 21, 419–444, https://doi.org/10.1007/s00792-016-0908-9 (2017).
Article CAS PubMed Google Scholar
Dumorné, K., Córdova, D. C., Astorga-Eló, M. & Renganathan, P. Extremozymes: A Potential Source for Industrial Applications. J Microbiol Biotechnol 27, 649–659, https://doi.org/10.4014/jmb.1611.11006 (2017).
Article CAS PubMed Google Scholar
Plotka, M. et al. Biochemical Characterization and Validation of a Catalytic Site of a Highly Thermostable Ts2631 Endolysin from the Thermus scotoductus Phage vB_Tsc2631. PLoS One 10, e0137374, https://doi.org/10.1371/journal.pone.0137374 (2015).
Article CAS PubMed PubMed Central Google Scholar
Sawle, L. & Ghosh, K. How do thermophilic proteins and proteomes withstand high temperature? Biophys J 101, 217–227, https://doi.org/10.1016/j.bpj.2011.05.059 (2011).
Article CAS PubMed PubMed Central Google Scholar
Cheng, X., Zhang, X., Pflugrath, J. W. & Studier, F. W. The structure of bacteriophage T7 lysozyme, a zinc amidase and an inhibitor of T7 RNA polymerase. Proc Natl Acad Sci USA 91, 4034–4038 (1994).
Article ADS CAS Google Scholar
Carrasco-López, C. et al. Crystal structures of bacterial peptidoglycan amidase AmpD and an unprecedented activation mechanism. J Biol Chem 286, 31714–31722, https://doi.org/10.1074/jbc.M111.264366 (2011).
Article CAS PubMed PubMed Central Google Scholar
Yoshida, H., Kinoshita, K. & Ashida, M. Purification of a peptidoglycan recognition protein from hemolymph of the silkworm, Bombyx mori. J Biol Chem 271, 13854–13860 (1996).
Article CAS Google Scholar
Cho, S. et al. Structural insights into the bactericidal mechanism of human peptidoglycan recognition proteins. Proc Natl Acad Sci USA 104, 8761–8766, https://doi.org/10.1073/pnas.0701453104 (2007).
Article ADS CAS PubMed Google Scholar
Royet, J., Gupta, D. & Dziarski, R. Peptidoglycan recognition proteins: modulators of the microbiome and inflammation. Nat Rev Immunol 11, 837–851, https://doi.org/10.1038/nri3089 (2011).
Article CAS PubMed Google Scholar
Kim, M. S., Byun, M. & Oh, B. H. Crystal structure of peptidoglycan recognition protein LB from Drosophila melanogaster. Nat Immunol 4, 787–793, https://doi.org/10.1038/ni952 (2003).
Article CAS PubMed Google Scholar
Guan, R. et al. Crystal structure of a peptidoglycan recognition protein (PGRP) in complex with a muramyl tripeptide from Gram-positive bacteria. J Endotoxin Res 11, 41–46, https://doi.org/10.1179/096805105225006713 (2005).
Article CAS PubMed Google Scholar
Leone, P. et al. Crystal structure of Drosophila PGRP-SD suggests binding to DAP-type but not lysine-type peptidoglycan. Mol Immunol 45, 2521–2530, https://doi.org/10.1016/j.molimm.2008.01.015 (2008).
Article CAS PubMed Google Scholar
Krissinel, E. & Henrick, K. Inference of macromolecular assemblies from crystalline state. J Mol Biol 372, 774–797, https://doi.org/10.1016/j.jmb.2007.05.022 (2007).
Article CAS PubMed Google Scholar
Di Tommaso, P. et al. T-Coffee: a web server for the multiple sequence alignment of protein and RNA sequences using structural information and homology extension. Nucleic Acids Res 39, W13–17, https://doi.org/10.1093/nar/gkr245 (2011).
Article CAS PubMed PubMed Central Google Scholar
Agier, J., Efenberger, M. & Brzezińska-Błaszczyk, E. Cathelicidin impact on inflammatory cells. Cent Eur J Immunol 40, 225–235, https://doi.org/10.5114/ceji.2015.51359 (2015).
Article CAS PubMed PubMed Central Google Scholar
Lavigne, R., Briers, Y., Hertveldt, K., Robben, J. & Volckaert, G. Identification and characterization of a highly thermostable bacteriophage lysozyme. Cell Mol Life Sci 61, 2753–2759, https://doi.org/10.1007/s00018-004-4301-y (2004).
Article CAS PubMed Google Scholar
Plotka, M. et al. Novel highly thermostable endolysin from Thermus scotoductus MAT2119 bacteriophage Ph2119 with amino acid sequence similarity to eukaryotic peptidoglycan recognition proteins. Appl Environ Microbiol 80, 886–895, https://doi.org/10.1128/AEM.03074-13 (2014).
Article CAS PubMed PubMed Central Google Scholar
Briers, Y. & Lavigne, R. Breaking barriers: expansion of the use of endolysins as novel antibacterials against Gram-negative bacteria. Future Microbiol 10, 377–390, https://doi.org/10.2217/fmb.15.8 (2015).
Article CAS PubMed Google Scholar
Shen, M. Y. & Sali, A. Statistical potential for assessment and prediction of protein structures. Protein Sci 15, 2507–2524, https://doi.org/10.1110/ps.062416606 (2006).
Article CAS PubMed PubMed Central Google Scholar
Webb, B. & Sali, A. Protein Structure Modeling with MODELLER. Methods Mol Biol 1654, 39–54, https://doi.org/10.1007/978-1-4939-7231-9_4 (2017).
Article CAS PubMed Google Scholar
Baldwin, A. J. & Inoue, K. The most C-terminal tri-glycine segment within the polyglycine stretch of the pea Toc75 transit peptide plays a critical role for targeting the protein to the chloroplast outer envelope membrane. FEBS J 273, 1547–1555, https://doi.org/10.1111/j.1742-4658.2006.05175.x (2006).
Article CAS PubMed Google Scholar
Michel, T., Reichhart, J. M., Hoffmann, J. A. & Royet, J. Drosophila Toll is activated by Gram-positive bacteria through a circulating peptidoglycan recognition protein. Nature 414, 756–759, https://doi.org/10.1038/414756a (2001).
Article ADS CAS PubMed Google Scholar
Kumar, S. et al. Selective recognition of synthetic lysine and meso-diaminopimelic acid-type peptidoglycan fragments by human peptidoglycan recognition proteins I{alpha} and S. J Biol Chem 280, 37005–37012, https://doi.org/10.1074/jbc.M506385200 (2005).
Article CAS PubMed Google Scholar
Chen, W. et al. Structural and Energetic Basis of Carbohydrate–Aromatic Packing Interactions in Proteins. Journal of the American Chemical Society 135, 9877–9884, https://doi.org/10.1021/ja4040472 (2013).
Article CAS PubMed PubMed Central Google Scholar
Sandalova, T. et al. The crystal structure of the major pneumococcal autolysin LytA in complex with a large peptidoglycan fragment reveals the pivotal role of glycans for lytic activity. Mol Microbiol 101, 954–967, https://doi.org/10.1111/mmi.13435 (2016).
Article CAS PubMed PubMed Central Google Scholar
Meroueh, S. O. et al. Three-dimensional structure of the bacterial cell wall peptidoglycan. Proc Natl Acad Sci USA 103, 4404–4409, https://doi.org/10.1073/pnas.0510182103 (2006).
Article ADS CAS PubMed Google Scholar
Razvi, A. & Scholtz, J. M. Lessons in stability from thermophilic proteins. Protein Sci 15, 1569–1578, https://doi.org/10.1110/ps.062130306 (2006).
Article CAS PubMed PubMed Central Google Scholar
Pucci, F. & Rooman, M. Physical and molecular bases of protein thermal stability and cold adaptation. Curr Opin Struct Biol 42, 117–128, https://doi.org/10.1016/j.sbi.2016.12.007 (2017).
Article CAS PubMed Google Scholar
Kozlowski, L. P. Proteome-pI: proteome isoelectric point database. Nucleic Acids Res 45, D1112–D1116, https://doi.org/10.1093/nar/gkw978 (2017).
Article CAS PubMed Google Scholar
Dougherty, D. A. Cation-pi interactions in chemistry and biology: a new view of benzene, Phe, Tyr, and Trp. Science 271, 163–168 (1996).
Article ADS CAS Google Scholar
Pack, S. P. & Yoo, Y. J. Protein thermostability: structure-based difference of amino acid between thermophilic and mesophilic proteins. J Biotechnol 111, 269–277, https://doi.org/10.1016/j.jbiotec.2004.01.018 (2004).
Article CAS PubMed Google Scholar
Morgan, A. A. & Rubenstein, E. Proline: the distribution, frequency, positioning, and common functional roles of proline and polyproline sequences in the human proteome. PLoS One 8, e53785, https://doi.org/10.1371/journal.pone.0053785 (2013).
Article ADS CAS PubMed PubMed Central Google Scholar
Panja, A. S., Bandopadhyay, B. & Maiti, S. Protein Thermostability Is Owing to Their Preferences to Non-Polar Smaller Volume Amino Acids, Variations in Residual Physico-Chemical Properties and More Salt-Bridges. PLoS One 10, e0131495, https://doi.org/10.1371/journal.pone.0131495 (2015).
Article CAS PubMed PubMed Central Google Scholar
Sokalingam, S., Raghunathan, G., Soundrarajan, N. & Lee, S. G. A study on the effect of surface lysine to arginine mutagenesis on protein stability and structure using green fluorescent protein. PLoS One 7, e40410, https://doi.org/10.1371/journal.pone.0040410 (2012).
Article ADS CAS PubMed PubMed Central Google Scholar
Kaczorowski, T. & Szybalski, W. Co-operativity of hexamer ligation. Gene 179, 189–193, https://doi.org/10.1016/S0378-1119(96)00324-1 (1996).
Article CAS PubMed Google Scholar
Stefanska, A. et al. Discovery and characterization of RecA protein of thermophilic bacterium Thermus thermophilus MAT72 phage Tt72 that increases specificity of a PCR-based DNA amplification. J Biotechnol 182–183, 1–10, https://doi.org/10.1016/j.jbiotec.2014.04.015 (2014).
Article CAS PubMed Google Scholar
Stefanska, A. et al. Highly thermostable RadA protein from the archaeon Pyrococcus woesei enhances specificity of simplex and multiplex PCR assays. J Appl Genet 57, 239–249, https://doi.org/10.1007/s13353-015-0314-5 (2016).
Article CAS PubMed Google Scholar
Bradford, M. M. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal Biochem 72, 248–254 (1976).
Article CAS Google Scholar
Adams, P. D. et al. PHENIX: a comprehensive Python-based system for macromolecular structure solution. Acta Crystallogr D Biol Crystallogr 66, 213–221, https://doi.org/10.1107/S0907444909052925 (2010).
Article CAS PubMed PubMed Central Google Scholar
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta Crystallogr D Biol Crystallogr 66, 486–501, https://doi.org/10.1107/S0907444910007493 (2010).
Article CAS PubMed PubMed Central Google Scholar
Desmarais, S. M., Cava, F., de Pedro, M. A. & Huang, K. C. Isolation and preparation of bacterial cell walls for compositional analysis by ultra performance liquid chromatography. J Vis Exp, e51183, https://doi.org/10.3791/51183 (2014).
Schuck, P. Size-distribution analysis of macromolecules by sedimentation velocity ultracentrifugation and lamm equation modeling. Biophys J 78, 1606–1619, https://doi.org/10.1016/S0006-3495(00)76713-0 (2000).
Article CAS PubMed PubMed Central Google Scholar

Download references

Acknowledgements

Funding was provided by the European Union’s Horizon 2020 Research and Innovation programme Virus-X project: Viral Metagenomics for Innovation Value (grant no. 685778). We thank Prof. Jaroslaw Marszalek for critical reading of the manuscript. We thank Prof. Shahriar Mobashery (University of Notre Dame, USA) for peptidoglycan coordinates.

Author information

Authors and Affiliations

Laboratory of Extremophiles Biology, Department of Microbiology, Faculty of Biology, University of Gdansk, Gdansk, Poland
Magdalena Plotka, Sebastian Dorawa & Tadeusz Kaczorowski
Unidad de Biofisica, Centro Mixto Consejo Superior de Investigaciones Científicas-Universidad del País Vasco/Euskal Herriko Unibertsitatea (CSIC,UPV/EHU), Leioa, Bizkaia, Spain
Enea Sancho-Vaello
Collection of Plasmids and Microorganisms, Faculty of Biology, University of Gdansk, Gdansk, Poland
Anna-Karina Kaczorowska
Institute of Informatics, Faculty of Mathematics, Informatics and Mechanics, University of Warsaw, Warsaw, Poland
Lukasz P. Kozlowski
Department of Science and Environment, Roskilde University, Roskilde, Denmark
Kornelius Zeth

Authors

Magdalena Plotka
View author publications
You can also search for this author in PubMed Google Scholar
Enea Sancho-Vaello
View author publications
You can also search for this author in PubMed Google Scholar
Sebastian Dorawa
View author publications
You can also search for this author in PubMed Google Scholar
Anna-Karina Kaczorowska
View author publications
You can also search for this author in PubMed Google Scholar
Lukasz P. Kozlowski
View author publications
You can also search for this author in PubMed Google Scholar
Tadeusz Kaczorowski
View author publications
You can also search for this author in PubMed Google Scholar
Kornelius Zeth
View author publications
You can also search for this author in PubMed Google Scholar

Contributions

Conceived and designed the experiments: M.P., K.Z. and T.K. Performed the experiments: M.P., E.S.V. and S.D. Analyzed the data: M.P., A.-K.K., L.P.K., K.Z. and T.K. Wrote the paper: M.P., K.Z., A.-K.K., and T.K.

Corresponding authors

Correspondence to Magdalena Plotka or Tadeusz Kaczorowski.

Ethics declarations

Competing Interests

The authors declare no competing interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and permissions

About this article

Cite this article

Plotka, M., Sancho-Vaello, E., Dorawa, S. et al. Structure and function of the Ts2631 endolysin of Thermus scotoductus phage vB_Tsc2631 with unique N-terminal extension used for peptidoglycan binding. Sci Rep 9, 1261 (2019). https://doi.org/10.1038/s41598-018-37417-6

Download citation

Received: 09 July 2018
Accepted: 30 November 2018
Published: 04 February 2019
DOI: https://doi.org/10.1038/s41598-018-37417-6

This article is cited by

Diversity of the lysozyme fold: structure of the catalytic domain from an unusual endolysin encoded by phage Enc34
- Elina Cernooka
- Janis Rumnieks
- Andris Kazaks
Scientific Reports (2022)
MMPphg from the thermophilic Meiothermus bacteriophage MMP17 as a potential antimicrobial agent against both Gram-negative and Gram-positive bacteria
- Feng Wang
- Yan Xiong
- Lianbing Lin
Virology Journal (2020)
Exploiting phage receptor binding proteins to enable endolysins to kill Gram-negative bacteria
- Athina Zampara
- Martine C. Holst Sørensen
- Lone Brøndsted
Scientific Reports (2020)
A potent enzybiotic against methicillin-resistant Staphylococcus aureus
- Jasjeet Kaur
- Prashant Singh
- Sanjay Chhibber
Virus Genes (2020)

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.