UID:
almafu_9959326914202883
Format:
1 online resource (2 online resources) :
,
illustrations
Edition:
Electronic reproduction. [Place of publication not identified] : HathiTrust Digital Library, 2011.
ISBN:
9780470294437
,
0470294434
,
9780470294925
,
0470294922
,
9780470294444
,
0470294442
,
9780470294932
,
0470294930
Series Statement:
Ceramic engineering & science proceedings, v. 18, no. 3-4
Note:
[pt. A/no. 3]. High temperature structural silicides / John J. Petrovic -- Advanced ceramics in the U.S. for the 21st century : prospects and challenges / Stephen W. Freiman, George Y. Onoda Jr. -- Synthesis and characterization of mullite and YAG fibers grown from deeply undercooled melts / Dong Zhu, Mohammad H. Jilavi, Waltraud M. Kriven -- Solar reflector coatings for space applications / Yoshiro Harada, Mukund Deshpande -- Passivation of inner surfaces of chemical process reactor tubes by chemical vapor deposition / Terence J. Clark -- Synthesis and thermal stability of a Si-N-(O) fiber / Ulrich Vogt, Georg Chollon, Karl Berroth -- Fabrication and mechanical properties of polymer melt spun yttrium aluminum garnet (YAG) fiber / Dragan Popovich, John L. Lombardi, Bruce H. King -- Scaling technogy for production of continuous ceramic fiber / J.J. Biernacki -- Piezoelectric fibers produced by the fibrous monolith technique / Gene A. Danko, Dragan Popovich, Fatih Dogan -- Creep and subcritical crack growth of Nextel 720 alumino silicate fibers as received and after heat treatment at 1300°C / J. Göring, H. Schneider -- Microstructure and interfacial properties of laser ablation coated, fiber-reinforced ceramic composite / Dong Zhu, Helen Chung, Mohammad H. Jilavi, Waltraud M. Kriven -- Thermal stability and chemical corrosion resistance of newly developed continuous Si-Zr-C-O Tyranno fiber / Kiyoshi Kumagawa, Hiroyuki Yamaoka, Masaki Shibuya, Takemi Yamamura -- On the statistical strength of Nicalon fibers and its characterization / Yuntian T. Zhu, Seth T. Taylor, Michael G. Stout, Darryl P. Butt, William R. Blumenthal, Terry C. Lowe -- Polymer architecture and crystallization behavior of SiCN-fiber precursors / D. Suttor, J. Hacker, S. Trassl, H. Müller, H.-J. Kleebe, G. Ziegler -- High temperature contraction behavior of polymer-derived SiC fibers / Hee Mann Yun, James A. Dicarlo -- Structure and properties of Sylramic silicon carbide fiber : a polycrystalline, stoichiometric [beta]-SiC composition / J. Lipowitz, J.A. Rabe, A. Zangvil, Y. Xu -- Joining of silicon carbide based ceramics by reaction forming approach / M. Singh -- Electrically insulating joining of carbon-carbon composites for high temperature applications / Liang A. Xue -- oining ceramic composites using active metal/HPCS preceramic polymer slurries / W.J. Sherwood, C.K. Whitmarsh, J.M. Jacobs, L.V. Interrante -- Intra-granular strengthening and toughening by brittle nanoparticles in ceramic nanocomposites / Tatsuki Ohji -- Thermal shock resistance of mullite and mullite-ZrO₂-SiC-whisker composites / William H. Kelly, Anthony N. Palazotto, Robert Ruh, Jonas K. Heuer, Avigdor Zangvil -- Grain size control and phase transformations in nanophase Al₂O₃-ZrO₂ / Bridget M. Smyser, Jane F. Connelly, Richard D. Sisson Jr., Virgil Provenzano -- Fracture toughness and reliability of Si₃N₄ whisker-reinforced Si₃N₄ ceramics / Célio A. Costa, Judith A. Todd -- Sinter-plus-HIPing of zirconia and zirconia-toughened alumina (ZTA) ceramic matrix composites / A.G. Solomah -- Spark-erosion process effects on the properties and performance of a TiB₂ particulate-reinforced/SiC matrix ceramic composite / M. Ramulu, M.G. Jenkins, J.A. Daigneault -- Solid-particle erosion of an Al₂O₃-SiC-TiC composite / Ming Jiang, K.C. Goretta, Dileep Singh, J.L. Routbort -- Fractal analysis of a multilayered composite DCB specimen / J. Cuneo, Z. Chen, J.J. Mecholsky Jr., T.L. Jessen -- Stress relaxation around crack tip in ceramic composites / Hidenari Baba, Seijiro Hayashi, Akihiko Suzuki -- Characterization of grain-boundary fracture in ceramics / T. Nishida, K. Maruyama, N. Muraki, H.-J. Kleebe, G. Pezzotti -- Monazite interface coatings in polymer and sol-gel derived ceramic matrix composites / A. Cazzato, M. Colby, D. Daws, J. Davis, P. Morgan, J. Porter, S. Butner, B. Jurf -- Isotropic complex oxides as fiber coatings for oxide-oxide CFCC / Richard W. Goettler, Sankar Sambasivan, Vinayak P. Dravid -- Liquid MOCVD precursors and their application to fiber interface coatings / Paul V. Chayka -- Microstructural characterization of a 2-D woven Nicalon/SiC ceramic composite by scanning electron microscopy line-scan technique / Wei Zhao, Peter K. Liaw, David C. Joy -- Effect of the surface structure of Si-Ti-C-O fiber on the properties of 3-dimensional fiber reinforced silicon carbide composites / T. Tanaka, N. Tamari, I. Kondo, M. Iwasa -- Evaluation of fibre-matrix interfacial strength in a SiC fibre-reinforced Ti-6Al-4V composite / R. Berriche, P. Saxena, A.K. Koul, J. Beddoes -- The characterisation and properties of coatings on high volume fraction metal matrix composites / S.M. Nuttall, P.M. Mummery, R.M.K. Young -- Microstructure and mechanical properties for alumina/copper nanocomposites / Sung-Tag Oh, Tohru Sekino, Koichi Niihara -- Studies of NbC-WC solid solution-graphite composites / Yoshiro Harada, Mukund Deshpande -- The role of crack morphology on the failure behavior of laminated composites / S.B. Biner -- Mechanical performance of multi-layered silicon nitride / Tatsuki Ohji, Kiyoshi Hirao, Shuzo Kanzaki -- Effects of oil degradation on the friction and wear properties of silicon nitride/M-50 steel sliding couples / Robert Sabia, David Mitchell, James H. Adair -- Alumina woven fibre-reinforced composites produced by directed melt oxidation / X. Gu, E.G. Butler -- Effects of interface modification on mechanical behavior of Hi-Nicalon fiber-reinforced celsian matrix composites / Narottam R Bansal, Jeffrey I. Eldridge -- Processing and performance of CFCCs using vacuum assisted resin transfer molding and Blackglas preceramic polymer pyrolysis / M.N. Ghaseminejhad, Jocelyn K. Bayliss, R. Leung, J.G. Sikonia -- Effects of lamina stacking sequence on the in-plane elastic stress distribution of a plain-weave Nicalon fiber reinforced SiC laminated composite with a lay-up of [0/30/60] / Wei Zhao, Peter K. Liaw, Niann-I Yu -- Fabrication and properties of SiC/SiC composites derived from Ceraset SN preceramic polymer / David V. Miller, Donald L. Pommell, Gerhard H. Schiroky -- Fabrication and mechanical properties of reaction sintered silicon carbide matrix composite / T. Kameda, A. Sayano, N. Amiji, H. Ichikawa, H. Hamada, A. Fujita, T. Uozumi -- Structure and characterization of SiC matrix composite via slurry and pulse CVI joint process / K. Suzuki, K. Nakano -- Redistribution of internal stresses in composites : an approach for increasing the matrix cracking stress / Edgar Lara-Curzio, Christiana M. Russ -- Modeling strength degradation of hypervelocity impacted windows for the space shuttle / G.-Q. Zhu, J.E. Ritter, K. Jakus -- Multiaxial internal variable modeling of the creep deformation and fracture of an advanced silicon nitride / R.M. Hazime, C.S. White -- An analysis of creep crack growth of interface cracks in layered/graded materials / S.B. Biner -- Prediction of SiAlON diesel valve failure probability using Allied Signal's ceramic and Erica life prediction codes / A.A. Wereszczak, T.P. Kirkland, M.K. Ferber, M.J. Andrews -- Numerical modeling of the mechanical response of a continuous fiber ceramic composite in flexure / K.Y. Mark, M.G. Jenkins -- Error in flexure testing of advanced ceramics under cyclic loading / Sung R. Choi -- Fracture in unidirectional off-axis ceramic matrix composite / Alex S. Selvarathinam, Y.J. Weitsman.
,
Effects of coal slag corrosion on the mechanical properties of sintered [alpha]-silicon carbide / Sophie E. Hannel, Kristin Breder, Debra L. Joslin -- Environmental durability of BN-based interphases (for SiCf/SiCm composites) in H₂O containing atmospheres at intermediate temperatures / G.N. Morscher, D.R. Bryant, R.E. Tressler -- Silicon nitride at very high temperatures : bubble and pit formation / K.G. Nickel, E. Butchereit -- Stressed oxidation of C/SiC composites / Michael C. Halbig, David N. Brewer, Andrew J. Eckel, James D. Cawley -- Thermal-mechanical fatigue of fiber-reinforced ceramics / David J. Weinberg, Frank K. Myers, John W. Holmes -- Processing and oxidation behavior of Y₅Si₃ / J. Williams, M. Akine -- The effect of neutron irradiation on silicon carbide fibers / G.A. Newsome -- Effect of irradiation on thermal expansion of SiCf/SiC composites / D.J. Senor, D.J. Trimble, G.A. Newsome, J.J. Woods -- Oxidation and hot corrosion of Dupont Lanxide enhanced SiC/SiC and HITCO SiC/C Composites / George Y. Richardson, Robert W. Kowalik -- Fabrication and properties of quasi-isotropic silicon nitride-boron nitride fibrous monoliths / Gene A. Danko, Gregory E. Hilmas, John W. Halloran, Bruce King -- Silicon nitride composites materials with an improved high temperature oxidation resistance / Hagen Klemm, Mathias Herrmann, Christian Schubert -- Selective material characterisation of ceramic matrix composites for advanced gas turbines / K. Iffländer, G.C. Gualco, F. Rosatelli, S. Hampshire, E.H. Van Brug, A. Ferrière, G.P. Rodriguez, R.J. Fordham, P. Dupel, N. Mason, M. Nedele -- The behavior of two Si3N₄ and two SiC ceramics subject to oxidation environments / H.S. Rho, N.L. Hecht, G.A. Graves -- Prediction of the oxidation behaviour of carbon fibre-based high temperature composites for hypersonic flight and power generation / K. Iffländer, K. Keller -- Hypervelocity micrometeorite damage in fused silica space shuttle windows / J. Lankford, K. Edelstein, Lyndon B. Johnson -- Effects of material removal process on the high-temperature performance of an oxide-matrix CFCC / K.R. Fehlmann, M.G. Jenkins -- Creep behavior of compositionally varied Si/SiC composites / Hong Zhou, James E. Webb, Raj N. Singh -- High-temperature load transfer in Nicalon/BMAS glass-ceramic matrix composites / Sujanto Widjaja, Karl Jakus, John E. Ritter, Edgar Lara-Curzio, Ellen Y. Sun, Thomas R. Watkins, John J. Brennan -- The effect of high temperature on the microstructure and properties of Nicalon-reinforced zirconium phosphate composites / Barry A. Bender, Roy J. Rayne, Todd L. Jessen, Scott Browning -- Effect of fiber architecture on mechanical behavior of SiC(f)/SiC composites / Dileep Singh, Jitendra P. Singh, Manish Sutaria -- Development of engineered inhomogeneities for mechanical behavior studies of unidirectional CFCMCs / Todd L. Jessen, Victor A. Greenhut, Barry A. Bender -- Thermal-shock behavior of advanced ceramic/composite hot-gas filters / J.P. Singh, M. Sutaria, W. Bielke -- Tensile tests of miniature fiber reinforced ceramic composites for screening process-property relations / S.T. Gonczy, R.C. Sprandel, K.T. Faber -- The effect of static and cyclic tensile stress and temperature on failure for precracked Hi-Nicalon/BN/CVD SiC minicomposites in air / Gregory N. Morscher -- The monotonic and fatigue behavior of a Nicalon/alumina composite at ambient and elevated temperatures / N. Miriyala, P.K. Liaw, C.J. McHargue, L.L. Snead, J.A. Morrison -- Effect of abrasive wear on interfacial shear sliding resistance in SiC fiber-reinforced Al₂O₃ matrix composite / H. Kakisawa, Y. Kagawa -- Thermo-mechanical fatigue behavior of cross-ply ceramic matrix composite under tension-tension loading / D.G. Allen, S. Mall -- Structure and properties of Si-Ti-C-O fiber-bonded ceramics / Toshihiro Ishikawa, Shinji Kajii, Yasuhiko Kohtoku, Takemi Yamamura -- Some mechanical properties of SiC(Hi-Nicalon) fiber-reinforced SiC matrix Nicaloceram composites / M. Takeda, Y. Imai, H. Ichikawa, Y. Kagawa, H. Iba, H. Kakisawa -- Optmechanical fiber-reinforced glass matrix composite : fabrication and properties / H. Iba, T. Chang, Y. Kagawa.
,
[pt. B/no. 4]. Hot pressing analysis of ceramic powders with green density gradients / Sandeepan Bhattacharya, Karl Jakus, Ian Grosse -- Micro-gas turbine engine materials and structures / S.M. Spearing, K.S. Chen -- Superplasticity in silicon nitride / J.A. Schneider, A.K. Mukherjee -- Synthetic low-shrinkage oxide-matrices from filled polymeric siloxanes / D. Suttor, H.-J. Kleebe, G. Ziegler -- Fabrication and properties of erbium oxide / A. Neuman, M. Platero, R. Romero, K.J. McClellan, J.J. Petrovic -- Tensile creep performance of a developmental, in-situ reinforced silicon nitride / A.A. Wereszczak, T.P. Kirkland, H.-T. Lin, M.K. Ferber, C.-W. Li, J.A. Goldacker -- Interstitial chemistry effects on sintering of Ti₅Si₃ / Andrew J. Thom, Mufit Akinc -- Viscous slip at grain boundaries in highly covalent ceramics / G. Pezzotti, K. Maruyama, K. Ota, H.-J. Kleebe, T. Nishida -- Characterization of innovatively synthesized low cost NZP powders / J.A. Curtis, R. Nageswaran, S.Y. Limaye, C.R. Hubbard, W.D. Porter, S.T. Misture -- Characterizing the performance of advanced rolling element materials / D.J. Mitchell, R. Sabia, E.D. Whitney, J.H. Adair -- Characterization of machining-induced sub-surface damage of a high strength silicon nitride / R.D. Ott, K. Bredert, T.R. Watkins, M.K. Ferbert, J.M. Rigsbee -- Synthesis and microstructure of powder and porous ZrO₂ from hydrolysis process / Masakuni Ozawa, Suguru Suzuki, C.-K. Loong, P. Thiyagarajan -- Laminated object manufacturing, a new process for the direct manufacture of monolithic ceramics and continuous fiber CMCs / Don Klosterman, Richard Chartoff, Nora Osborne, George Graves -- The sintering effects of time, temperature, and ZNO additions on CMZP ceramics / J.R. Clarke, D.A. Hirschfeld -- Microstructure and mechanical evaluation of yttrium phosphate-containing and lanthanum phosphate-containing zirconia laminates / Dong-Hau Kuo, Waltraud M. Kriven -- Brazing of heat sink attachments for new electronic ceramic substrates / Wendy B. Hanson, John A. Fernie, Norman R. Stockham -- The use of compact tension specimens to measure slow crack growth in continuous-fiber composites at elevated temperatures / C.A. Lewinsohn, C.H. Henager Jr., R.H. Jones -- Fracture toughness of ceramics using the SEVNB method : preliminary results / Jakob Kübler -- Fracture toughness by the surface crack in flexure (SCF) method : new test results / George D. Quinn, Jeffrey J. Swab, Michael D. Hill -- Investigation of halos associated with fracture toughness precracks / Jeffrey J. Swab, George D. Quinn -- Micro-strength evaluation of alumina using biaxial flexure technique / A. Okada, H. Kawamoto, H. Usami -- Use of indentation technique to measure elastic modulus of plasma-sprayed zirconia thermal barrier coating / J.P. Singh, M. Sutaria, M. Ferber -- Gas evolution from advanced ceramics during fracture under ultra high vacuum / S. Kitaoka, H. Matsubara, H. Kawamoto, H. Yanagida, M. Matsumoto, M. Kanno -- Stress-rupture of Nicalon/SiC at intermediate temperatures / Edgar Lara-Curzio, P.F. Tortorelli, K.L. More -- Application of continuous fiber reinforced silicon carbide matrix composites to a ceramic gas turbine model for automobiles / Yutaka Sanokawa, Yasuji Ido, Yoshio Sohda, Norio Nakazawa, Hiroshi Kaya -- Testing of monolithic ceramics and fiber reinforced ceramic composites for gas turbine combustors / Jane F. Simpson, Vijay M. Parthasarathy, Anthony Fahme -- Shear strength and non-destructive evaluation of thermally shocked CFCC's / James E. Webb, Raj N. Singh, Peter B. Nagy, Richard A. Lowden -- Piezoelectric composite oscillator method for modulus and internal friction evaluation of ceramic / Masakuni Ozawa, Suguru Suzuki, Masahiko Inagaki -- A correlation of air-coupled ultrasonic and thermal diffusivity data for CFCC materials / T.A.K. Pillai, W.A. Ellingson, J.G. Sun, T.E. Easler, A. Szweda -- Magnetic resonance imaging of gel-cast ceramic composites / S.L. Dieckman, K.M. Balss, J.A. Jendrzejczyk, A.C. Raptis -- Three new nondestructive evaluation tools based on high flux neutron sources / Camden R. Hubbard, Dudley Raine, Roberta Peascoe, Michael Wright, Paul M. Whaley, Paul Koehler -- Laser-based optical scattering detection of surface and subsurface defects in machined Si₃N₄ components / J.G. Sun, M. Shirber, W.A. Ellingson -- Ultrashort laser pulse scattering by optmechanical composites for analysis of light-transmission / H. Iba, Y. Kagawa -- Nondestructive evaluation of Nicalon/Sic composites by ultrasonics and X-ray computed tomography / J. Kim, P.K. Liaw, D.K. Hsu, D.J. McGuire -- Mechanism-based design of composite structures program overview and accomplishments / George J. Dvorak -- Software framework for mechanism-based design of composite structures / R. Wentorf, M.S. Shephard, G.J. Dvorak, J. Fish, M.W. Beall, R. Collar, K.-L. Shek -- Modeling and adaptive numerical techniques for oxidation of ceramic composites / S. Adjerid, M. Aiffa, J.E. Flaherty, J.B. Hudson, M.S. Shephard -- Modeling and simulation of failure processes in composites / Jacob Fish, Kamlun Shek, Said Gomaa, Mark S. Shephard, George J. Dvorak, William E. Bachrach, Amr M. Wafa -- Dynamic and transient characterization of ceramic fibers at elevated temperatures / S.S. Sternstein, R. Warren -- Improved properties of silicide matrix composites / S. Augustin, M. Broglio, P. Lipetzky, N.S. Stoloff, M. Nazmy -- Multi-axial response of a woven continuous-fiber composite / P. Lipetzky, G.J. Dvorak, N.S. Stoloff -- Atmospheric effects on high-temperature lifetime of ceramic composites / P. Lipetzky, N.S. Stoloff, G.J. Dvorak -- Effect of salt corrosion on mechanical properties of a SiC-SiC composite in dry and moist high-temperature environment / P. Lipetzky, M. Lieblich, W. Hillig, D. Duquette -- Behavior of SiC-fiber/Al₂O₃ composite with Na-based salts in dry and moist oxidizing environments / P. Lipetzky, M. Lieblich, W. Hillig, D. Duquette.
,
The use of secondary ion mass spectrometry (SIMS) in the analysis of alumina-boria-silica ceramic / E.A. Leone, S.S. Campbell -- The effect of processing parameters on the surface nitridation of Nextel 312 ceramic / Scott Campbell, Edgar Leone, Mike McNallan -- Synthesis and thermal stability of nitrogen-containing Blackglas ceramic / Roger Y. Leung, Michael Glazier, Mary Ann Meador -- Development of mechanistic model for Blackglas pyrolysis : comparison of theory and experiment / W.N. Gill, A. Kulkarni, F. Wang, Y.W. Lee, J. Madsen, A. Tobin, T. Donnellan -- Characterization of Blackglas/BN/Nicalon composites / Gang Qi, W. Roger Cannon, Stephen C. Danforth -- Thermal wave nondestructive evaluation of ceramic matrix composite components / P. Khandelwal, S.M. Shepard, T. Ahmed -- Effect of powder characteristics on the [alpha]-to-[beta] Si₃N₄ transformation kinetics / T.N. Tiegs, F.C. Montgomery, J.L. Schroeder, D.L. Barker, P.A. Menchhofer -- Phase transformation and microstructure in the mixed cations of [alpha]/[beta]-SiAlON composite / Tzer-Shin Sheu -- Optimization of sintering aids in silicon nitrides for cutting tool application / R.D. Nixon, P.K. Mehrotra -- Porous silicon nitride with oriented anisotropic pores / Yasuhiro Shigegaki, Manuel E. Brito, Kiyoshi Hirao, Motohiro Toriyama, Shuzo Kanzaki -- The influence of carbon on the structure of preceramic polymer derived SiC / Lynne E. Kolaya, Nathan Lewis -- High temperature characteristics of Si₃N₄/BN fibrous monolithic ceramics / Shi Woo Lee, Do Kyung Kim -- Effect of sintering atmosphere on the microstructure evolution and mechanical properties of silicon carbide ceramics / Hyung-Woo Jun, Hae-Weon Lee, Gyeung-Ho Kim, Heu-Sup Song, Byung-Ho Kim -- Novel microstructure of microwave-sintered silicon nitride doped with Al₂O₃ and Y₂O₃ / Yoon Chang Kim, Do Kyung Kim, Chong Hee Kim, Kang Bai, Jun Whan Yang -- Correlation between microstructure and mechanical properties in silicon nitride ceramics / Hiroshi Hohjo, Nobuo Kamiya, Takashi Miyata -- Modelling of the sintering behaviour of Al₂O₃ with a neural network / H. Hofmann -- International Symposium on Advanced Synthesis and Processing : preface / Kathryn V. Logan, Zuhair A. Munir, Richard M. Spriggs -- Developments in microwave processing technologies / D.E. Clark, D.C. Folz -- Microwave joining and repair of ceramics and ceramic composites / Ki-Yong Lee, Eldon D. Case, Donnie Reinhard -- Microwave heating rates of silicon carbide/alumina cement susceptors / K.S. Leiser, R.R. Di Fiore, A.D. Cozzi, D.E. Clark -- Microwave induced reduction/oxidation of powders to form ceramic-metal composites / R.R. Di Fiore, D.E. Clark -- Shock synthesis of materials : effects of starting materials and shock conditions / Toshimori Sekine -- Shock reactive synthesis of refractory metal aluminides and silicides / Tatsuhiko Aizawa -- High-speed bulk mechanical alloying for solid-phase synthesis of fine-grained and exotic materials / Tatsuhiko Aizawa -- Bulk mechanical alloying of Co-Cu / Tatsuhiko Aizawa, Zhao Cheng, Kazuto Tokumitsu, Junji Kihara -- Efficient grinding of silicon nitride / Y. Nagano, M. Mizuno -- Effects of pre-existing silicon nitride in the direct nitridation process of liquid silicon / Tzer-Shin Sheu -- Titanium effects on sintering and grain boundary mobility of alumina / J.D. Powers, A.M. Glaeser -- Simultaneous combustion synthesis and densification of SiC, TiC, and SiC-TiC composites / B.M. Karwoski, D.W. Readey, J.J. Moore -- Controlled combustion synthesis in the Ti-B system / Z.X. Peng, S.B. Bhaduri -- Combustion synthesis of nanocrystalline powders in Al₂O₃-MgO binary system / S. Bhaduri, E. Zhou, S.B. Bhaduri -- Development of phases in combustion synthesized nanocrystalline-ZrO₂ / E. Zhou, S. Bhaduri, S.B. Bhaduri -- Preparation of nanocrystalline silicon nitride composite with nano-size particles of titanium nitride / Takashi Matsuura, Akira Yamakawa -- Fabrication and properties of Nano-Sized Bn-particulate-dispersed SiAlON ceramics / T. Mizutani, T. Kusunose, M. Sando, K. Niihara -- Preparation of mullite coated SiC particulates as precursors for mullite-SiC nanocomposites / U.S. Hareesh, G.M. Anilkumar, A.D. Damodaran, K.G.K. Warrier -- Potential of nanosized ceramic powder for functional applications / H. Hofinann, J. Dutta, S. Scholz-Odermatt, R. Vacassy, J.-Ch. Valmalette -- Synthesis of submicron [beta]-SiC powders / Sai V. Cattamanchi, Rasit Koc -- Kinetics and phase evolution during carbothermal synthesis of titanium carbide / Rasit Koc -- A novel non-oxide sol-gel process to Si-C-N ceramics / Andreas O. Gabriel, Ralf Riedel -- Recent advances in rapid vapor-phase densification of high-temperature fiber-matrix composites Ilan Golecki -- Manufacturing of plasma-sprayed graded structures / M.I. Mendelson -- The design of a piezoelectric based sensor for applications at high temperature / B.R. Jooste, S. Schroeder, H.J. Viljoen -- Hydrothermal synthesis of diamond : challenges and opportunities / Y.G. Gogotsi, K.G. Nickel -- Thermal diffusivity mapping of 4D carbon-carbon composites / H. Wang, R.B. Dinwiddie -- Characterization of tri-axially reinforced 3-D C/C composites / T. Ozaki, T. Honda.
,
Master and use copy. Digital master created according to Benchmark for Faithful Digital Reproductions of Monographs and Serials, Version 1. Digital Library Federation, December 2002.
Additional Edition:
Print version: Conference on Composites, Advanced Ceramic Materials, and Structures (21st : 1997 : Cocoa Beach, Fla.). Proceedings of the 21st Annual Conference on Composites, Advanced Ceramics, Materials, and Structures. Westerville, Ohio : American Ceramic Society, ©1997
Language:
English
Keywords:
Electronic books.
;
Conference papers and proceedings.
;
Electronic books.
;
Conference papers and proceedings.
;
Electronic books.
;
Conference papers and proceedings.
DOI:
10.1002/9780470294437
DOI:
10.1002/9780470294444
URL:
https://onlinelibrary.wiley.com/doi/book/10.1002/9780470294437
URL:
https://onlinelibrary.wiley.com/doi/book/10.1002/9780470294444
URL:
https://onlinelibrary.wiley.com/doi/book/10.1002/9780470294444
URL:
https://onlinelibrary.wiley.com/doi/book/10.1002/9780470294437
URL:
https://onlinelibrary.wiley.com/doi/book/10.1002/9780470294437
URL:
https://onlinelibrary.wiley.com/doi/book/10.1002/9780470294444
Bookmarklink