Kooperativer Bibliotheksverbund

UID:

Umfang: 1 Online-Ressource(XII, 474 p. 397 illus., 344 illus. in color.)

Ausgabe: 1st ed. 2024.

ISBN: 9783031609206

Serie: Advanced Structured Materials 209

Inhalt: -- Characterization of TiN Coatings on cpTi Substrates. - Application of the Digital Image Correlation and the Strain Gauge Method for Determination of the Test Sample Material Properties -- Methodology for Obtaining Porous Metal Materials (Aluminum 6061) for Biomedical Applications Using Chips With Controlled Size -- Analysis of the Aging of Buried Pipes of a Boiling Water Reactor Nuclear Power Plant Due to the Thinning of Their Wall Thickness -- A Note on Optimization-Based Strategies to Identification of Material Parameters in Thermo Hygro Mechanical Problems -- Computational Simulation of Biaxial Loading of Polymer Composites in ANSYS -- Simple Discretisation Strategies for Better Convergence of Finite Element Model Without Increasing the Number of Degrees of Freedom -- Pinhole Effect and Formation of Microplastics on PVC, PP and PET Surfaces Initiated by Plasma -- Evaluation of the Level Set and Anti Diffusion Functions Influence in the Simulation of Non Newtonian Dam Break Problems -- Solving the Clogging Problem for an Iron Ore Storage Bin in the Direct Reduction of Iron Process: An Experimental Approach -- Experimental Dynamic Testing for Wear of TMJ Prosthesis Component in a Multiaxial Join Simulator -- Numerical Analysis of the Coxofemoral Joint with Hip Prosthesis and Aggressive Osteoporosis -- Numerical Mechanical Design of a Football Helmet to Dissipate Energy Through Finite Element Failure Technique -- Bone Biomodel for Mechanical Simulation Using Finite Elements -- Development of a Robotic Arm Prototype with Three Degrees of Freedom for Upper Limb Amputees -- Bone Based Biomechanical Numerical Analysis and its Weight Loss Due to the Presence of Osteoporosis Based on Finite Element Analysis -- Analysis Developed from an Extremely Complex System of the Human Shoulder Based on Finite Element Method (FEM) -- Biomechanical Analysis of the Human Body Thorax Protected by a Kevlar® Plate When Subjected to a Point Load -- Generative Design Prosthesis Proposal for the Case of a Bullet Impact in the Skull, Made of PMMA -- Evaluation of the Mechanical Behavior of Biomedical Materials in a Cryogenic Environment -- Numerical simulation of the biomechanical behavior of the impacted foot on a variable density insole -- Materialisation of a System for the Production of Rapid Prototypes with Synthetics -- Design of a System for the Rehabilitation of the Symptoms Caused by the Phantom Limb Syndrome for Patients with Full Amputation -- Study of the Optimization of a Dental Articulator System -- Biomodeling of C1 and C2 Cervical Vertebrae to Determine their Structural Integrity under Static Conditions -- Research of Nonlinear Output Regulation for Systems Described by Takagi Sugeno Fuzzy Descriptor Models with Steady State Mapping for the Optimization and Implementation of a Hand Rehabilitation -- Mathematical Model that Defines the Ionic Movement of Cells of the Eyeball by External Electric Fields -- Monitoring Design Proposals for Aquatic Therapy Linked to Industry 4.0 -- Developing a Humidity Transfer Standard for On Site Instrument Verification -- Adaptative Histogram Equalization for Contrast and Illumination Enhancement of Dffuse Opacities in Digital Radiographic Chest Images Associated with COVID 19 -- Towards Alternative Energy Ship’s Design: Sensors’ Energy Efficiency in Switchgears -- A Multi Agent System for Decision Support with Petri Nets in Large -- Production Systems -- Renewable Energies for Sustainable Economic Growth -- Cosmometry of Galaxies.

Inhalt: This book gives an update on recent developments in the mentioned areas of modern engineering design application. Different engineering disciplines such as mechanical, materials, computer and process engineering provide the foundation for the design and development of improved structures, materials and processes. The modern design cycle is characterized by an interaction of different disciplines and a strong shift to computer-based approaches where only a few experiments are performed for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also connected to environmental demands. In the transportation industry (e.g. automotive), this is connected with the demand for higher fuel efficiency, which is related to the operational costs and the lower harm for the environment. One way to fulfil such requirements are lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health, medical, and environmental sectors.

Weitere Ausg.: ISBN 9783031609190

Weitere Ausg.: ISBN 9783031609213

Weitere Ausg.: ISBN 9783031609220

Weitere Ausg.: Erscheint auch als Druck-Ausgabe ISBN 9783031609190

Weitere Ausg.: Erscheint auch als Druck-Ausgabe ISBN 9783031609213

Weitere Ausg.: Erscheint auch als Druck-Ausgabe ISBN 9783031609220

Sprache: Englisch

DOI: 10.1007/978-3-031-60920-6

URL: lizenzpflichtig

Mehr zum Autor: Altenbach, Holm 1956-

Mehr zum Autor: Öchsner, Andreas 1970-

UID:

Umfang: XII, 474 p. 397 illus., 344 illus. in color. , online resource.

Ausgabe: 1st ed. 2024.

ISBN: 9783031609206

Serie: Advanced Structured Materials, 209

Inhalt: This book gives an update on recent developments in the mentioned areas of modern engineering design application. Different engineering disciplines such as mechanical, materials, computer and process engineering provide the foundation for the design and development of improved structures, materials and processes. The modern design cycle is characterized by an interaction of different disciplines and a strong shift to computer-based approaches where only a few experiments are performed for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also connected to environmental demands. In the transportation industry (e.g. automotive), this is connected with the demand for higher fuel efficiency, which is related to the operational costs and the lower harm for the environment. One way to fulfil such requirements are lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health, medical, and environmental sectors.

Anmerkung: -- Characterization of TiN Coatings on cpTi Substrates. - Application of the Digital Image Correlation and the Strain Gauge Method for Determination of the Test Sample Material Properties -- Methodology for Obtaining Porous Metal Materials (Aluminum 6061) for Biomedical Applications Using Chips With Controlled Size -- Analysis of the Aging of Buried Pipes of a Boiling Water Reactor Nuclear Power Plant Due to the Thinning of Their Wall Thickness -- A Note on Optimization-Based Strategies to Identification of Material Parameters in Thermo Hygro Mechanical Problems -- Computational Simulation of Biaxial Loading of Polymer Composites in ANSYS -- Simple Discretisation Strategies for Better Convergence of Finite Element Model Without Increasing the Number of Degrees of Freedom -- Pinhole Effect and Formation of Microplastics on PVC, PP and PET Surfaces Initiated by Plasma -- Evaluation of the Level Set and Anti Diffusion Functions Influence in the Simulation of Non Newtonian Dam Break Problems -- Solving the Clogging Problem for an Iron Ore Storage Bin in the Direct Reduction of Iron Process: An Experimental Approach -- Experimental Dynamic Testing for Wear of TMJ Prosthesis Component in a Multiaxial Join Simulator -- Numerical Analysis of the Coxofemoral Joint with Hip Prosthesis and Aggressive Osteoporosis -- Numerical Mechanical Design of a Football Helmet to Dissipate Energy Through Finite Element Failure Technique -- Bone Biomodel for Mechanical Simulation Using Finite Elements -- Development of a Robotic Arm Prototype with Three Degrees of Freedom for Upper Limb Amputees -- Bone Based Biomechanical Numerical Analysis and its Weight Loss Due to the Presence of Osteoporosis Based on Finite Element Analysis -- Analysis Developed from an Extremely Complex System of the Human Shoulder Based on Finite Element Method (FEM) -- Biomechanical Analysis of the Human Body Thorax Protected by a Kevlar® Plate When Subjected to a Point Load -- Generative Design Prosthesis Proposal for the Case of a Bullet Impact in the Skull, Made of PMMA -- Evaluation of the Mechanical Behavior of Biomedical Materials in a Cryogenic Environment -- Numerical simulation of the biomechanical behavior of the impacted foot on a variable density insole -- Materialisation of a System for the Production of Rapid Prototypes with Synthetics -- Design of a System for the Rehabilitation of the Symptoms Caused by the Phantom Limb Syndrome for Patients with Full Amputation -- Study of the Optimization of a Dental Articulator System -- Biomodeling of C1 and C2 Cervical Vertebrae to Determine their Structural Integrity under Static Conditions -- Research of Nonlinear Output Regulation for Systems Described by Takagi Sugeno Fuzzy Descriptor Models with Steady State Mapping for the Optimization and Implementation of a Hand Rehabilitation -- Mathematical Model that Defines the Ionic Movement of Cells of the Eyeball by External Electric Fields -- Monitoring Design Proposals for Aquatic Therapy Linked to Industry 4.0 -- Developing a Humidity Transfer Standard for On Site Instrument Verification -- Adaptative Histogram Equalization for Contrast and Illumination Enhancement of Dffuse Opacities in Digital Radiographic Chest Images Associated with COVID 19 -- Towards Alternative Energy Ship's Design: Sensors' Energy Efficiency in Switchgears -- A Multi Agent System for Decision Support with Petri Nets in Large -- Production Systems -- Renewable Energies for Sustainable Economic Growth -- Cosmometry of Galaxies.

In: Springer Nature eBook

Weitere Ausg.: Printed edition: ISBN 9783031609190

Weitere Ausg.: Printed edition: ISBN 9783031609213

Weitere Ausg.: Printed edition: ISBN 9783031609220

Sprache: Englisch

DOI: 10.1007/978-3-031-60920-6

URL: https://doi.org/10.1007/978-3-031-60920-6

UID:

Umfang: 1 online resource (467 pages)

Ausgabe: 1st ed.

ISBN: 3-031-60920-4

Serie: Advanced Structured Materials Series ; v.209

Anmerkung: Intro -- Preface -- Contents -- 1 Characterization of TiN Coatings on cpTi Substrates -- 1.1 Introduction -- 1.2 Material for Research -- 1.3 Research Methodology -- 1.3.1 Potentiodynamic Tests -- 1.3.2 EIS Tests -- 1.3.3 Surface Wettability -- 1.3.4 Adhesion TiN for Substrate -- 1.4 Research Results -- 1.4.1 Potentiodynamic Tests -- 1.4.2 EIS Tests -- 1.4.3 Surface Wettability -- 1.4.4 Adhesion TiN for Substrate -- 1.5 Summary -- References -- 2 Application of the Digital Image Correlation and the Strain Gauge Method for Determination of the Test Sample Material Properties -- 2.1 Introduction -- 2.2 Test Samples Preparation -- 2.3 Experimental Measurement Apparatus -- 2.4 DIC Analysis Setup -- 2.5 Results and Discussion -- 2.6 Summary -- References -- 3 Methodology for Obtaining Porous Metal Materials (Aluminum 6061) for Biomedical Applications Using Chips with Controlled Size -- 3.1 Introduction -- 3.2 Materials and Methods -- 3.3 Results -- 3.4 Discussions and Conclusions -- Bibliography -- 4 Analysis of the Aging of Buried Pipes of a Boiling Water Reactor Nuclear Power Plant Due to the Thinning of Their Wall Thickness -- 4.1 Introduction -- 4.2 Statement of the Problem -- 4.3 Materials and Methods -- 4.3.1 Analytical Analysis -- 4.3.2 Numerical Analysis -- 4.4 Results -- 4.5 Conclusion -- References -- 5 A Note on Optimization-Based Strategies to Identification of Material Parameters in Thermo-Hygro-Mechanical Problems -- 5.1 Introduction -- 5.2 Direct and Inverse Problems -- 5.2.1 Direct Problem: Governing Equations and Numerical Approximation -- 5.2.2 Inverse Problem: Optimization Strategy -- 5.3 Results and Discussions -- 5.4 Final Remarks -- References -- 6 Computational Simulation of Biaxial Loading of Polymer Composites in ANSYS -- 6.1 Introduction -- 6.2 Materials and Methods and Computational Models -- 6.2.1 Materials Used. , 6.2.2 Methods Used -- 6.2.3 Computational Models -- 6.3 Results and Discussion -- 6.3.1 Arcan Cyclic Biaxial Test Results -- 6.3.2 Computational Simulation Results with Discussion -- 6.4 Conclusions -- References -- 7 Simple Discretisation Strategies for Better Convergence of Finite Element Model Without Increasing the Number of Degrees of Freedom -- 7.1 Introduction -- 7.2 The Main Steps of Axial Displacement Computation for Materials with a Nonlinear Constitutive Law -- 7.2.1 The Non-linear Power Law Constitutive Relation -- 7.2.2 Finite Element Computational Model Setup of 1D Axial Load-Displacement Problem -- 7.2.3 Post-processing: Inner Forces Determination -- 7.2.4 Post-processing: Determination of Displacements, Strains and Stresses Functions -- 7.3 Meshing Algorithms and Their Application -- 7.3.1 The Test Example -- 7.3.2 Elementary Meshing Algorithm A0-Finite Elements of Equal Lengths -- 7.3.3 Meshing Algorithm A1av: Two-Parametric Algorithm -- 7.3.4 Meshing Algorithm A2-Two Parametric "Power" Algorithm -- 7.3.5 Meshing Algorithm A3av-Two Parametric "Geometric Series" Algorithm -- 7.3.6 Meshing Algorithms A4-Single Parametric "Trigonometric" Algorithm -- 7.3.7 Meshing Algorithm A5-Single-Parametric "Logarithmic" Algorithm -- 7.3.8 Meshing Algorithm A6-A One-Parametric "Mechanical" Algorithm -- 7.3.9 Overview of the Results and Detailed Comparison Between A1av and A3av Algorithms -- 7.4 Further Numerical Examples -- 7.4.1 The (Non-linear) Impact of Strain Hardening Exponent n on the Convergence of the Results -- 7.4.2 Convergence Study for 2024 Aluminium Alloy (n = 0.16) -- 7.4.3 Convergence Studies for Some Other Values of Strain Hardening Exponent -- 7.5 Conclusions -- References -- 8 Pinhole Effect and Formation of Microplastics on PVC, PP and PET Surfaces Initiated by Plasma -- 8.1 Introduction -- 8.2 Materials and Methods. , 8.3 Results and Discussion -- 8.4 Conclusion -- References -- 9 Evaluation of the Level-Set and Anti-diffusion Functions Influence in the Simulation of Non-Newtonian Dam Break Problems -- 9.1 Introduction -- 9.2 Modeling Aspects -- 9.3 Results and Discussion -- 9.4 Conclusion -- References -- 10 Solving the Clogging Problem for an Iron Ore Storage Bin in the Direct Reduction of Iron Process: An Experimental Approach -- 10.1 Introduction -- 10.1.1 Cause of Clogging -- 10.2 Mechanical Components -- 10.2.1 Cone -- 10.2.2 Conveyor -- 10.2.3 Cement Sprinkler -- 10.2.4 Water Sprinkler -- 10.2.5 Frame -- 10.3 Electric Components -- 10.3.1 Circuit -- 10.3.2 Arduino Code -- 10.4 Results -- 10.5 Conclusion -- References -- 11 Experimental Dynamic Testing for Wear of TMJ Prosthesis Component in a Multiaxial Join Simulator -- 11.1 Introduction -- 11.1.1 Temporomandibular Disorders -- 11.1.2 Treatments for TMDs -- 11.2 Materials and Methods -- 11.2.1 Mandibular Component Design -- 11.2.2 Digitization and Solidification of Mandibular Component -- 11.2.3 Dynamic Testing -- 11.3 Results -- 11.4 Conclusions -- References -- 12 Numerical Analysis of the Coxofemoral Joint with Hip Prosthesis and Aggressive Osteoporosis -- 12.1 Introduction -- 12.2 Drawing of the Bio-Models -- 12.3 Bio-Models Obtained -- 12.4 Results -- 12.5 Conclusions -- Appendix -- References -- 13 Numerical Mechanical Design of a Football Helmet to Dissipate Energy Through Finite Element Failure Technique -- 13.1 Introduction -- 13.2 Methodology/Biomodeling -- 13.3 Materials/Methods -- 13.4 Research Cases -- 13.4.1 First Research Case -- 13.4.2 Second Research Case -- 13.4.3 Third Research Case -- 13.5 Results -- 13.6 Conclusions -- References -- 14 Bone Biomodel for Mechanical Simulation Using Finite Elements -- 14.1 Introduction -- 14.1.1 Computational Biomechanics for Mechanical Analysis. , 14.2 Methodology -- 14.2.1 Computerized Tomography (CT) Obtention of Biological System -- 14.2.2 DICOM Format Images Processing for Computational Programs -- 14.2.3 STereoLitography Files Exportation (Model Error Correction) -- 14.2.4 Model Importation in a Finite Element (ANSyS) Program -- 14.3 Results and Conclusions -- References -- 15 Development of a Robotic Arm Prototype with Three Degrees of Freedom for Upper Limb Amputees -- 15.1 Introduction -- 15.2 Statement of the Problem -- 15.3 Materials and Methods -- 15.3.1 Design of the Prototype -- 15.3.2 Instrumentation of the Prototype -- 15.3.3 Design of the Control System -- 15.3.4 Development of the Algorithm -- 15.3.5 Assembly of the Prototype -- 15.4 Discussion of the Results -- 15.5 Conclusions -- References -- 16 Bone-Based Biomechanical Numerical Analysis and Its Weight Loss Due to the Presence of Osteoporosis Based on Finite Element Analysis -- 16.1 Introduction -- 16.2 3D Biomodelling -- 16.3 Numerical Simulation -- 16.4 Modification of Complex 3D Biomodelling -- 16.5 Numerical Simulation -- 16.6 Results -- References -- 17 Analysis Developed from an Extremely Complex System of the Human Shoulder Based on Finite Element Method (FEM) -- 17.1 Introduction -- 17.2 3D Model Development -- 17.3 Results -- 17.4 Conclusion -- References -- 18 Biomechanical Analysis of the Human Body Thorax Protected by a Kevlar® Plate When Subjected to a Point Load -- 18.1 Introduction -- 18.2 Methodology -- 18.3 Boundary Condition Application -- 18.4 Numerical Analysis -- 18.5 Results -- 18.6 Conclusions -- References -- 19 Generative Design Prosthesis Proposal for the Case of a Bullet Impact in the Skull, Made of PMMA -- 19.1 Introduction -- 19.2 Methodology -- 19.2.1 Segmentation -- 19.2.2 Parametrization and Assembly -- 19.2.3 Numerical Analysis -- 19.3 Results -- 19.4 Discussion of Results. , 19.5 Conclusion -- References -- 20 Evaluation of the Mechanical Behavior of Biomedical Materials in a Cryogenic Environment -- 20.1 Introduction -- 20.2 Materials and Methodology -- 20.2.1 Numerical Simulation and Voronoi Pattern -- 20.2.2 Boundary Conditions -- 20.3 Results -- 20.4 Discussion of Results -- 20.5 Conclusion -- References -- 21 Numerical Simulation of the Biomechanical Behavior of the Impacted Foot on a Variable Density Insole -- 21.1 Introduction -- 21.2 Methods -- 21.2.1 Analytic Evaluation of the Phenomenon -- 21.2.2 Anthropometry -- 21.2.3 Model in CAD and FEA -- 21.3 Results -- 21.4 Conclusions -- References -- 22 Materialisation of a System for the Production of Rapid Prototypes with Synthetics -- 22.1 Introduction -- 22.2 Materials and Methods -- 22.2.1 Methods -- 22.2.2 Materials -- 22.3 Outcomes Discussion -- 22.4 Conclusions -- References -- 23 Design of a System for the Rehabilitation of the Symptoms Caused by the Phantom Limb Syndrome for Patients with Full Amputation -- 23.1 Introduction -- 23.2 Methodology -- 23.2.1 Investigation -- 23.2.2 Parametrization -- 23.2.3 Instrumentation -- 23.2.4 Numerical Analysis -- 23.3 Conclusions -- References -- 24 Study of the Optimization of a Dental Articulator System -- 24.1 Introduction -- 24.2 Methodology -- 24.2.1 Requirements -- 24.3 Optimization -- 24.4 Simulation -- 24.5 Results -- 24.6 Conclusions -- References -- 25 Biomodeling of C1 and C2 Cervical Vertebrae to Determine Their Structural Integrity Under Static Conditions -- 25.1 Introduction -- 25.2 Aim -- 25.3 Materials and Methods -- 25.4 Results -- 25.5 Conclusion -- References -- 26 Research of Nonlinear Output Regulation for Systems Described by Takagi-Sugeno Fuzzy Descriptor Models with Steady State Mapping for the Optimization and Implementation of a Hand Rehabilitation -- 26.1 Introduction -- 26.2 Methodology. , 26.2.1 Representation.

Weitere Ausg.: ISBN 3-031-60919-0

Sprache: Englisch

UID:

Umfang: 1 online resource (467 pages)

Ausgabe: 1st ed. 2024.

ISBN: 3-031-60920-4

Serie: Advanced Structured Materials, 209

Inhalt: This book gives an update on recent developments in the mentioned areas of modern engineering design application. Different engineering disciplines such as mechanical, materials, computer and process engineering provide the foundation for the design and development of improved structures, materials and processes. The modern design cycle is characterized by an interaction of different disciplines and a strong shift to computer-based approaches where only a few experiments are performed for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also connected to environmental demands. In the transportation industry (e.g. automotive), this is connected with the demand for higher fuel efficiency, which is related to the operational costs and the lower harm for the environment. One way to fulfil such requirements are lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health, medical, and environmental sectors.

Anmerkung: -- Characterization of TiN Coatings on cpTi Substrates. - Application of the Digital Image Correlation and the Strain Gauge Method for Determination of the Test Sample Material Properties -- Methodology for Obtaining Porous Metal Materials (Aluminum 6061) for Biomedical Applications Using Chips With Controlled Size -- Analysis of the Aging of Buried Pipes of a Boiling Water Reactor Nuclear Power Plant Due to the Thinning of Their Wall Thickness -- A Note on Optimization-Based Strategies to Identification of Material Parameters in Thermo Hygro Mechanical Problems -- Computational Simulation of Biaxial Loading of Polymer Composites in ANSYS -- Simple Discretisation Strategies for Better Convergence of Finite Element Model Without Increasing the Number of Degrees of Freedom -- Pinhole Effect and Formation of Microplastics on PVC, PP and PET Surfaces Initiated by Plasma -- Evaluation of the Level Set and Anti Diffusion Functions Influence in the Simulation of Non Newtonian Dam Break Problems -- Solving the Clogging Problem for an Iron Ore Storage Bin in the Direct Reduction of Iron Process: An Experimental Approach -- Experimental Dynamic Testing for Wear of TMJ Prosthesis Component in a Multiaxial Join Simulator -- Numerical Analysis of the Coxofemoral Joint with Hip Prosthesis and Aggressive Osteoporosis -- Numerical Mechanical Design of a Football Helmet to Dissipate Energy Through Finite Element Failure Technique -- Bone Biomodel for Mechanical Simulation Using Finite Elements -- Development of a Robotic Arm Prototype with Three Degrees of Freedom for Upper Limb Amputees -- Bone Based Biomechanical Numerical Analysis and its Weight Loss Due to the Presence of Osteoporosis Based on Finite Element Analysis -- Analysis Developed from an Extremely Complex System of the Human Shoulder Based on Finite Element Method (FEM) -- Biomechanical Analysis of the Human Body Thorax Protected by a Kevlar® Plate When Subjected to a Point Load -- Generative Design Prosthesis Proposal for the Case of a Bullet Impact in the Skull, Made of PMMA -- Evaluation of the Mechanical Behavior of Biomedical Materials in a Cryogenic Environment -- Numerical simulation of the biomechanical behavior of the impacted foot on a variable density insole -- Materialisation of a System for the Production of Rapid Prototypes with Synthetics -- Design of a System for the Rehabilitation of the Symptoms Caused by the Phantom Limb Syndrome for Patients with Full Amputation -- Study of the Optimization of a Dental Articulator System -- Biomodeling of C1 and C2 Cervical Vertebrae to Determine their Structural Integrity under Static Conditions -- Research of Nonlinear Output Regulation for Systems Described by Takagi Sugeno Fuzzy Descriptor Models with Steady State Mapping for the Optimization and Implementation of a Hand Rehabilitation -- Mathematical Model that Defines the Ionic Movement of Cells of the Eyeball by External Electric Fields -- Monitoring Design Proposals for Aquatic Therapy Linked to Industry 4.0 -- Developing a Humidity Transfer Standard for On Site Instrument Verification -- Adaptative Histogram Equalization for Contrast and Illumination Enhancement of Dffuse Opacities in Digital Radiographic Chest Images Associated with COVID 19 -- Towards Alternative Energy Ship’s Design: Sensors’ Energy Efficiency in Switchgears -- A Multi Agent System for Decision Support with Petri Nets in Large -- Production Systems -- Renewable Energies for Sustainable Economic Growth -- Cosmometry of Galaxies.

Weitere Ausg.: ISBN 3-031-60919-0

Sprache: Englisch

DOI: 10.1007/978-3-031-60920-6