UID:
almahu_9948026329002882
Format:
xiii, 413 p. :
,
ill.
Edition:
1st ed.
ISBN:
978-8-7506-8531-3
,
9788750685313
,
1-282-29015-0
,
9786612290152
,
0-08-094245-8
Content:
The materials mechanics of the controlled separation of a body into two or more parts - cutting -- using a blade or tool or other mechanical implement is a ubiquitous process in most engineering disciplines, be it mechanical, civil, medical, food or process based, and a surprising number of engineers are involved in cutting and the design of cutting tools. There are a wide range of books available on the cutting of metals, but no other text is devoted to the cutting of materials generally, the mechanics of which (toughness, fracture, deformation, plasticity, tearing, grating, chewing, etc) hav
Note:
Description based upon print version of record.
,
FRONT COVER; DEDICATION; THE SCIENCE AND ENGINEERING OF CUTTING: THE MECHANICS AND PROCESSES OF SEPARATING, SCRATCHING AND PUNCTURING BIOMATERIALS, METALS AND NON-METALS; COPYRIGHT PAGE; CONTENTS; PREFACE; ACKNOWLEDGEMENTS; CHAPTER 1 Controlled and Uncontrolled Separation of Parts: Cutting, Scraping and Spreading; CHAPTER 2 Fracture Mechanics and Friction: Muscles, Impact and New Surfaces; 2.1 Introduction; 2.2 Fracture Mechanics; 2.3 Friction in Cutting; 2.4 Muscles; 2.5 Impact Mechanics and Hammering; 2.6 Work of Formation of New Surfaces
,
CHAPTER 3 Simple Orthogonal Cutting of Floppy, Brittle and Ductile Materials3.1 Introduction; 3.2 Floppy Offcuts; 3.3 Different Types of Offcut Formation; 3.4 Brittle Offcuts; 3.5 Ductile Offcuts; 3.6 Offcut Formation by Shear; 3.7 Finite Element Simulations; 3.8 Cutting Through the Thickness of Ductile Sheets and Plates: Shearing and Cropping; CHAPTER 4 Types of Chip: Load Fluctuations, Scaling and Deformation Transitions; 4.1 Introduction; 4.2 Energy Scaling; 4.3 Variations in Depth of Cut and Rake Angle; 4.4 Cutting with a Built-up Edge; 4.5 Sawtooth Profile Chips
,
4.6 Classification of Chips4.7 Wood; CHAPTER 5 Slice-Push Ratio: Oblique Cutting and Curved Blades, Scissors, Guillotining and Drilling; 5.1 Introduction; 5.2 Floppy Materials; 5.3 Offcut Formed in Shear by Oblique Tool; 5.4 Guillotining Edges; 5.5 Drills, Augers and Pencil Sharpeners; CHAPTER 6 Cutting with More Than One Edge: Scratching, Grinding, Abrasive Wear, Engraving and Sculpting; 6.1 Introduction; 6.2 Scratching of Low ER/k[sup(2)] Solids; 6.3 Scratching of High ER/k[sup(2)] Solids; 6.4 Grinding and Abrasive Papers; 6.5 Scratch Hardness/Scratch Resistance
,
6.6 Scratching of Thin Films and Coatings: Pencil Hardness6.7 Erosion; 6.8 Definitions of the Coefficient of Friction; 6.9 Engraving, Writing Tablets and Polishing; CHAPTER 7 Sawing, Chisels and Files; 7.1 Introduction; 7.2 Knives and Chisels; 7.3 Saw Teeth; 7.4 Files; CHAPTER 8 Punching Holes: Piercing and Perforating, Arms and Armour; 8.1 Introduction; 8.2 Quasi-static Piercing with a Pointed Tool; 8.3 Quasi-static Circular Punching; 8.4 Hollow Punches; 8.5 Arms and Armour; 8.6 Penetration and Perforation of Armour
,
CHAPTER 9 Sharpness and Bluntness: Absolute or Relative? Tool Materials and Tool Wear9.1 Introduction; 9.2 Tool Materials; 9.3 Manufacture and Sharpening; 9.4 Geometry of the Cutting Edge; 9.5 Measurement of Sharpness; 9.6 Retention of Sharpness: Tool Wear and Machinability/Cuttability; 9.7 Effect of Bluntness and Clearance Face Rubbing on Cutting Forces, F[sub(C)] vs t Intercepts and Subsurface Deformation; 9.8 Cutting Edge Sharpness and Workpiece Critical Crack Tip Opening Displacement; 9.9 Compensation for Bluntness; 9.10 Wiggly Crack Paths Produced by Very Blunt Edges
,
CHAPTER 10 Unrestrained and Restrained Workpieces: Dynamic Cutting
,
English
Additional Edition:
ISBN 9788750685313
Additional Edition:
ISBN 0-7506-8531-X
Language:
English
Bookmarklink