In:
Journal of Applied Polymer Science, Wiley, Vol. 135, No. 15 ( 2018-04-15)
Kurzfassung:
In this reported study, poly(vinylidene fluoride) (PVDF) and polyacrylonitrile (PAN) blend flat‐sheet membranes were prepared via a phase‐inversion method with various loadings of multiwalled carbon nanotubes. The effects of the carbon nanotubes (CNTs) on the performance and morphology of the PVDF–PAN composites were investigated via tests of the pure water flux and rejection of bovine serum albumin, scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, and contact angle (CA) analysis. The experimental results demonstrate that the CNTs contributed to the improvement of the flux and hydrophilicity of the membranes. The maximum value of the flux was 398.1 L m −2 h −1 , and the value of CA for the composite membranes was found to be 48°. In addition, the results of the mechanical properties tests illustrate that the brittleness and plasticity of the hybrid membranes were greatly improved by the presence of the CNTs. The flux recovery ratio was maintained at 75%; this demonstrated that the PVDF–PAN membranes enhanced with the CNTs possessed good antifouling performance. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135 , 46155.
Materialart:
Online-Ressource
ISSN:
0021-8995
,
1097-4628
Sprache:
Englisch
Verlag:
Wiley
Publikationsdatum:
2018
ZDB Id:
1491105-X
