In:
Journal of Physics: Conference Series, IOP Publishing, Vol. 1507, No. 4 ( 2020-04-01), p. 042004-
Abstract:
Mechanical properties of 30SiMn2MoVA steel gun barrel processed by cold radial forging with stepped mandrel under the different forging ratios were investigated in the present work. This work mainly reported the axial and circumferential mechanical properties of forged gun barrel before and after annealing. The axial and circumferential mechanical properties were measured by tensile test and bulging test, respectively. The results suggested that the strength was enhanced and elongation was decreased by forging which was caused by cold work hardening. After annealing, the anisotropy of elongation was observed. The circumferential elongation was weaker than the axial. With the increasing of forging ratios, strength anisotropy was exacerbated gradually. The circumferential strength was inferior to the axial. Besides, there were axial penetrating cracks in the failure state of circumferential bulging test specimens. Through the electron microscopic examination, the axial micro cracks and wrinkles in the inner wall of the forged tubes were observed. It showed that the cold radial forging with stepped mandrel may result in the defect in the inner surface of the gun barrel which should be paid attention.
Type of Medium:
Online Resource
ISSN:
1742-6588
,
1742-6596
DOI:
10.1088/1742-6596/1507/4/042004
Language:
Unknown
Publisher:
IOP Publishing
Publication Date:
2020
detail.hit.zdb_id:
2166409-2
