In:
Coatings, MDPI AG, Vol. 9, No. 10 ( 2019-09-29), p. 629-
Kurzfassung:
Bench-scale cone calorimetry is often used to evaluate the fire performance of intumescent-type coatings. During the tests, the coating geometry inflates. These thick, block-shaped specimens expose their perimeter side surfaces to both the heat source and the surroundings, unlike the typical thin, plate-shaped samples used in flammability tests. We assessed the thermal boundaries of block-shaped specimens using plain steel solids with several thicknesses. The heat transmitted through the exposed boundaries in convection and radiation modes was determined by four sub-defining functions: non-linear irradiance, convective loss, and radiant absorption into and radiant emission from solids. The individual functions were methodically derived and integrated into numerical calculations. The predictions were verified by physical measurements of the metals under different heating conditions. The results demonstrate that (1) considering absorptivity, being differentiated from emissivity, led to accurate predictions of time-temperature relationships for all stages from transient, through steady, and to cooling states; (2) the determined values for the geometric view factor and the fluid dynamic coefficient of convection can be generalized for engineering applications; (3) the proposed process provides a practical solution for the determination of optical radiative properties (absorptivity and emissivity) for use in engineering; and (4) the heat transmitted through the side surfaces of block specimens should be included in energy balance, particularly in the quantification of a heat loss mechanism. This paper outlines a comprehensive heat transfer model for cone calorimetry testing, providing insights into the mechanism of complex heat transmission generated on the test samples and quantifying their individual contributions.
Materialart:
Online-Ressource
ISSN:
2079-6412
DOI:
10.3390/coatings9100629
Sprache:
Englisch
Verlag:
MDPI AG
Publikationsdatum:
2019
ZDB Id:
2662314-6
