In:
Materials, MDPI AG, Vol. 15, No. 21 ( 2022-10-26), p. 7509-
Kurzfassung:
The effect of the Mo contents of 1.0 wt.%, 1.5 wt.%, 2.0 wt.%, and 3.0 wt.% on the microstructures and mechanical properties of the polycrystalline superalloy with a high W content was studied. The typical dendrite morphology was observed in the high-W superalloy with different Mo contents, containing γ matrix, γ′ phase, eutectic, and MC carbide. After the heat treatment, the primary MC carbides were decomposed into M6C carbides, while a needle-like topologically close-packed (TCP) phase was formed in the alloy with high Mo content, in contrast to the other three alloys with low Mo content. The Mo addition increased the lattice parameter of the γ and γ′ phases and also changed the lattice misfits of the γ and γ′ phase lattice misfits towards a larger negative. The addition of Mo improved the yield strength at room temperature due to the solid solution strengthening and coherency strengthening. The improvement of the stress rupture lives at 975 °C/225 MPa was due to the combination of the suppressed propagation of the microcracks by the carbides and a more negative misfit. When the Mo content reached 3.0 wt.%, the TCP phases formed and decreased the ultimate tensile strength and the stress rupture lives as a result.
Materialart:
Online-Ressource
ISSN:
1996-1944
Sprache:
Englisch
Verlag:
MDPI AG
Publikationsdatum:
2022
ZDB Id:
2487261-1
